Results 1 to 6 of 6

Thread: lost pumps

  1. #1
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default lost pumps

    I have installed a new mp10 qd and upgraded the drivers on the remaing 3 to mp10 qd. the vortex controller sees them as mp40wwd. my touch only shows pumps 1 and 3 and the speed or % is wrong. is there a fix. Andre
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  2. #2
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default

    any one some help please
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  3. #3
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Are you able to control the second pump from GCC without issues? Is this pump programmed the same way as the 1st and 3rd pump?

    What FW version are you running on the ProfiLux Touch?

  4. #4
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default

    Quote Originally Posted by Vinny View Post
    Are you able to control the second pump from GCC without issues? Is this pump programmed the same way as the 1st and 3rd pump?

    What FW version are you running on the ProfiLux Touch?
    Firmware 1.05 all 4 of my pumps are programmed the same way they are set up to do tidal swell mode and that is what they are doing but the touch says 1 is 80% and 3 is 40% all day long the other pumps do not even show on the touch.
    Last edited by AndreO; 26.09.2016 at 17:35. Reason: other pumps
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  5. #5
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default

    I have now updated the touch and still only shows pump 1 at 80 and pump3 at 40 and I added one more pump to tank so now have 5 running and they are doing the Tidall swell mode as per ecotech and are controlled by the vortech controller. to solve the problem till there is a fix I do not display pumps on the touch
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  6. #6
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default

    I think that once the vortech controller is fixed then the profilux will see the pumps and they will show on the Touch
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •