ProfiLux Moon/Sunrise/Simu

[Froz3n]

Hallo,
I bought this comoputer and I can't manage with it.
At first I wanted to set up the light. I pressed "sun" after illumination then dimmable. Automatic - yes. then done all as I needed. But it is not working.
Then I wanted to return to factory setting. Watched in instruction, there were written Extras - Factory Setting. When I pressed Extras there were no Factory Setting. Now I am sitting and just dont know what to do.
Someone, explane me, please.
Sincerely,
Lisbeth

[chippypah]

Did you set the on off times, in the 1-10 volt ?.
Cheers
Pete

[Froz3n]

Thank you for the answer.
And what must I do? How many Wolts I must put?

[chippypah]

First of all in the illumination you need to set the on off times, then in the 1-10 set the illumination channel. So if in the first illumination channel you set moonlight, then that will be channel 1 on the 1-10 volt.
Hope this helps, if gets better the more you use it.
Cheers
Pete

[Froz3n]

Sorry.
how can I put this channels?
I put 8 volts

[chippypah]

You plug in your simi stick into L1 L2 the set the on off time and finally assign L1 to moon light L2 sunrise/set leave it set to 1-10volt.
Cheers
Pete

[Froz3n]

Okei, I understood that.
But can you just explain me step by step. What buttons I must press and so on.
Big thanks.

[APCP]

Hello Lisbeth

If you are living in the Netherlands you can phone me
My name and number are on the website
www.claqua.nl

regards
Piet

[Froz3n]

Hello,
I have a new question, if i want to connect new lamp to my profilux do i need GHL ActiveL-Splitter? I have already one lamp.

[chippypah]

Yes, or you can plug it into another L port.
Cheers
Pete