Results 1 to 3 of 3

Thread: how do i set up heater settings on profilux 3 with digital powerbar

  1. #1
    Join Date
    18.01.2016
    Posts
    81

    Default how do i set up heater settings on profilux 3 with digital powerbar

    how do i set up heater settings on profilux 3 with digital powerbar? thank you!

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    1. Go to the "Temperature" settings page and set the Nominal value. This is the desired temperature.
    2. In the same page, you can set the Hysteresis if you want to allow a larger swing before the heater reacts. Hysteresis is explained in the Profilux 3 Programming Guide.
    3. Go to the "Switch channels" page, and select the outlet that has the heater connected. Set the function to Temperature 1: Heater.
    4. Save settings.

  3. #3
    Join Date
    18.01.2016
    Posts
    81

    Default

    thanks as always vinny! <3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •