Why is my AWC not working

[GazzMan]

1.jpg
2.jpg
3.jpg
4.jpg
5.jpg

[GazzMan]

6.jpg
7.jpg

[Halfmoon]

I thought it was fixed here: http://forum.aquariumcomputer.com/sh...-level-sensors

Did something change? I had trouble reading the screen shots.

[GazzMan]

I tested it out back then on spare sockets I had, iv just tried to implement it full on and it just won't work mate

[Halfmoon]

This is how I have mine, I use two level sensors split on level 1 & 2 from the Profilux. I have max on time set to 3 hrs, 1.5 hrs to empty and 1.5 hrs to refill.
Settings.PNG
Level.PNG
I use Timer 4 to activate the water change, but I leave it blank so it doesn't run if I'm not home. I start the water change manually from the settings page. Just add a time for unattended changes.
Timer.PNG
My switches are as follows, yours would be different but the idea is the same.
Switches.PNG

HTH

[GazzMan]

Ok mate, thank you, I'm going to copy yours like for like, now if the water level gets down to the sensor before the 1.5 hours,then it will start to fill until it hits the top sensor, is that right