Seite 7 von 7 ErsteErste ... 567
Zeige Ergebnis 61 bis 64 von 64

Thema: Meanwell ELN-60-48D LED Driver

  1. #61
    Registriert seit
    15.05.2009
    Beiträge
    8

    Standard

    CAn we use this in the US?

  2. #62
    Registriert seit
    02.01.2010
    Beiträge
    242

    Standard

    Hi, I have not being paying attention to the operating voltage while posting it at RC. All here in EU is running on 220V or is at least 220/110V capable. But on your question I was looking closer to the spec sheet of the amplifier and there is just the operating voltage of 220V mentioned.

    If that is truth, than it will be ok to use a converter from 110 to 220V in line with the amplifier. The amplifier is just pulling 2W so I can’t realize problems by using a converter, only that it is an additional piece of equipment.

    BTW in work (we are often at pleases with just 110V) we use such converters 24/7 and with >200W for PC and battery charger (battery’s >9000mAh) and other appliances and so far we had no problems. Just google the right one for the application you need.

  3. #63
    Registriert seit
    05.10.2009
    Beiträge
    11

    Standard

    Can some help me? i wanna know if the PL-0644 ActiveL-Splitter can support X15 ELN-60-48 meanwell drivers. the splitter come with a power supply so i think it should support it.

    ken

  4. #64
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.638

    Standard

    Hi

    the ActiveL-Splitter provides only power for Simu-lamps, but doesn't amplify the 1-10V signals

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •