Seite 1 von 2 12 LetzteLetzte
Zeige Ergebnis 1 bis 10 von 11

Thema: how to work Profilux Vortech Controller?

  1. #1
    Registriert seit
    18.01.2016
    Beiträge
    81

    Standard how to work Profilux Vortech Controller?

    i plug one rj45 cable to the profilux from the vortech controller and the other rj45 cable to the pab power bar from the vortech controller as well? my vortech isn't wireless that doesn't matter right?

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    1.597

    Standard

    Hi,

    The PAB powerbar should be connected directly to the Profilux. You can then connect the Vortech controller either directly to the other PAB port on the Profilux or an available port on the PAB powerbar.

  3. #3
    Registriert seit
    18.01.2016
    Beiträge
    81

    Standard

    thanks vinny, how do i connect my vortech powerhead to the controller though? can't just plug the powerhead into the pab powerbar right? do i have to detach my powerhead from its original controller and somehow connect/wire it to the profilux?

  4. #4
    Registriert seit
    27.05.2015
    Beiträge
    1.597

    Standard

    Hi,

    You do not have to have the pump connected to the Powerbar.

    The GHL vortech controller will wirelessly communicate with the Vortech controller.

    Here's the instruction manual for the controller:
    https://www.aquariumcomputer.com/dow...roller-manual/

  5. #5
    Registriert seit
    18.01.2016
    Beiträge
    81

    Standard

    is 1 pab port good enough for 2 powerheads or is each port on the controller for each powerhead? i noticed there's 2 ports thanks

  6. #6
    Registriert seit
    06.02.2012
    Beiträge
    2.020

    Standard

    1 pab port good enough for 2 powerheads or is each port on the controller for each powerhead? i noticed there's 2 ports thanks
    One is enough. Two cables will not work due you cause a not allowed loop with that. Obviously it´s a good idea to read the PAB System descripton:
    https://www.aquariumcomputer.com/dow...m-description/

  7. #7
    Registriert seit
    18.01.2016
    Beiträge
    81

    Standard

    what's the point of the second port on the vortech controller then?

  8. #8
    Registriert seit
    08.02.2013
    Ort
    Victoria BC
    Beiträge
    160

    Standard

    that is so you add more Pab devises. I have 5 vortech pumps running on my controller just follow the instructions to the T. Think off it that the controller tells the pumps what to do. But I cannot say how important it is that you follow the manual ..
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  9. #9
    Registriert seit
    08.02.2013
    Ort
    Victoria BC
    Beiträge
    160

    Standard

    I have read you posts again and is it your pump that is not wireless. In order for the controller to work with the pumps they have to be wireless enabled. This means when they power up the W in the top right of the driver should light up if not you need to purchase the wireless module which is an easy install
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  10. #10
    Registriert seit
    18.01.2016
    Beiträge
    81

    Standard

    Zitat Zitat von AndreO Beitrag anzeigen
    that is so you add more Pab devises. I have 5 vortech pumps running on my controller just follow the instructions to the T. Think off it that the controller tells the pumps what to do. But I cannot say how important it is that you follow the manual ..
    i understand the controller wirelessly tells the pumps what to do just wasn't sure what was the point in the profilux vortech's controller's second pab port. why would someone want to hook the second port into another profilux controller?

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •