Results 1 to 6 of 6

Thread: Advice on temp of new chiller

  1. #1
    Join Date
    21.02.2009
    Posts
    35

    Default Advice on temp of new chiller

    Hi GHL,

    I have purchased a new Teco TR20 Chiller and here is my Question,

    I have a Pro II EX and Temp probe is showing 27.3 deg but when I turned on the Chiller it is reading 24.5 deg. Now I know that the GHL is correct as I have checked using a Standard Thermometer. Just goes how accurate the GHL is.

    My question is what settings should be used as it has be stumped.

    My desiered temp is 26 deg.

    I have it pluged into a digi Power Bar and this has been set to Temp 1 and chiller is selected. What temp di I set the chiller to and also what/how does the Hysterious work in this suituation.

    Thankyou

  2. #2
    Join Date
    20.02.2009
    Posts
    65

    Default

    If you hold in the top two buttons on the cooler, you can then adjust the reading to match the GHL.
    Cheers
    Pete

  3. #3
    Join Date
    21.02.2009
    Posts
    35

    Default

    Quote Originally Posted by chippypah View Post
    If you hold in the top two buttons on the cooler, you can then adjust the reading to match the GHL.
    Cheers
    Pete
    Thanks Pete, all sorted.

  4. #4
    Join Date
    20.02.2009
    Posts
    65

    Default

    Great.
    Cheers
    Pete

  5. #5
    Join Date
    23.08.2009
    Posts
    228

    Default

    Is there a similar key press sequence for the DD coolers? Mine is about .7C out of sync with my ghl probe.

    Thanks,
    Jason

  6. #6
    Join Date
    20.02.2009
    Posts
    65

    Default

    I am sure it is the same key press to calibrate.
    Cheers
    Pete

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •