Results 1 to 6 of 6

Thread: Profilux View II Cable Pinout

  1. #1
    Join Date
    28.08.2013
    Posts
    8

    Default Profilux View II Cable Pinout

    Can someone provide the proper pin mapping for the rs232 -> 6pin view cable? I recognize they are available for purchase, but I also have all the parts to make my own.

    Thanks,
    Adam

  2. #2
    Join Date
    28.08.2013
    Posts
    8

    Default

    bump

  3. #3
    Join Date
    28.08.2013
    Posts
    8

    Default

    Traced two pairs of the contacts back to the MAX232., found the ground and 12v supply.

    It was tricky because I found the second channel first which must be for the display and the first channel is for a computer connection.

    pins 1 and 6 shorted together

    using this as the guide for the female socket viewing it from the back
    DE09pinout.jpg

    1 -> T2OUT (Display?)
    2 -> T1OUT (Computer)
    3 -> R1OUT (Computer)
    4 -> R2IN (Display?)
    5 -> Ground
    6 -> Shorted to 1?
    7 -> NC?
    8 -> NC?
    9 -> 12v

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Profilux SUBD.png

    regards Pit

  5. #5
    Join Date
    28.08.2013
    Posts
    8

    Default

    Thanks!

  6. #6
    Join Date
    28.08.2013
    Posts
    8

    Default

    Do you happen to have the pin match for the display unit as well?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •