Vortech controller not working
Hello, updated my Vortech controller to firmware 1.04 and the controller interface to 1.14 without issue. I replaced a broken Ecosmart with a new Quite Drive, I now have one Ecosmart and one QD. Went to the controller overview and deleted all pump assignments, went through the process of getting the pumps ready to link to the controller, hit end and save assignments and nothing happens. Any idea of the problem? Can I not mix Eco and QD? I tried just the QD and still didn't work. Any help with this is much appreciated.
Edit: The lights on the controller are all on, the RF light is intermittent. I see the controller in GCC so I think the problem is between the pump and controller, not the controller and the Profilux. TIA.
Last edited by Halfmoon; 06.11.2015 at 18:06.
Perry
A screen shot is worth a thousand words...
Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
Controlling a 150 DSA Peninsula mixed reef.
Bookmarks