It does all an eco does, independent, slave, pulse, etc. I've got it doing a short sync pulse right now.
It does all an eco does, independent, slave, pulse, etc. I've got it doing a short sync pulse right now.
Perry
A screen shot is worth a thousand words...
Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
Controlling a 150 DSA Peninsula mixed reef.
so its not to bad..what is that you missing?
Should I see a Quiet Drive driver here?
QDDriver.jpg
Perry
A screen shot is worth a thousand words...
Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
Controlling a 150 DSA Peninsula mixed reef.
Updated firmware to the VorTech controller again, now both pumps show as Eco, an improvement of sorts. I'll post back for others if I ever find a solution to this problem.
Perry
A screen shot is worth a thousand words...
Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
Controlling a 150 DSA Peninsula mixed reef.
Good news.
Do you think first time something went wrong with upgrade? So, now you have one regular and one QD pumps?
Now both are Eco, still no QD...
Perry
A screen shot is worth a thousand words...
Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
Controlling a 150 DSA Peninsula mixed reef.
How many pumps you have in total?.. i thought one Eco and one QD
Now have two QD and the Vortech Controller sees nothing. Re-installed firmware 1.04, the controller was the only PAB device attached for this process. I can't re-install the controller interface since that button is not available, the firmware is already 1.14 and won't allow an overwrite. I've unassigned all PAB devices, reassigned and still I get this:
Vortech Module.jpg
If GHL could at least tell me if that image is normal?
Perry
A screen shot is worth a thousand words...
Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
Controlling a 150 DSA Peninsula mixed reef.
But pumps working fine, correct?
You able to program both pumps?
Sent from my iPhone using Tapatalk
Bookmarks