Results 1 to 6 of 6

Thread: Connect Doser 2 SA directly to PL3

  1. #1
    Join Date
    30.04.2011
    Posts
    44

    Default Connect Doser 2 SA directly to PL3

    Is connecting the Doser 2 SA to a PL3 computer via PAB supported (the Doser has the PAB ports but is it also supported by fw)?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi,

    The SA Doser 2 has PAB ports for daisy chaining Slave Doser 2 units.

    At this time the SA version is not compatible with the P3. We will soon be releasing the firmware which allows the SA to be run as a Slave.

  3. #3
    Join Date
    14.01.2010
    Posts
    101

    Default

    Quote Originally Posted by Vinny View Post
    Hi,

    The SA Doser 2 has PAB ports for daisy chaining Slave Doser 2 units.

    At this time the SA version is not compatible with the P3. We will soon be releasing the firmware which allows the SA to be run as a Slave.
    So would this mean that we can can just connect to the Profilux via myGHL and control the doser?

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    If there is a slave Doser 2 connected to the Profilux, then yes you will be able to control the doser when you connect to the Profilux via myGHL.

    The standalone version can be run on its own and be accessed via myGHL.

  5. #5
    Join Date
    29.03.2017
    Posts
    16

    Default

    "At this time the SA version is not compatible with the P3. We will soon be releasing the firmware which allows the SA to be run as a Slave." has this been released for Gen 1 dosers or is this not possible? thanks.
    Last edited by bktruong; 18.05.2018 at 08:16.

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Gen 1 dosers do not have the hardware capability to support this feature.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •