Hi Janey,
Please change S17 to "Fill Water 1"
OK Done.. And what about in the Level and Timer section.? Do i have to do anything in there ?
Thanks
Vinny
Make sure you set the "Maximum On-time" in the Level 1 setting.
Also, set sensor 2 to inverted. You can do this by going to the "Level" settings, scrolling down, and double-clicking on "Inverted". Select, "Yes"
Right where you have Sensor 2 selected, hover over to Inverted 2 and quickly click 3 or 4 times on the "NO". There will be a drop down box with the option to choose "YES". Save your settings once you've made that change.
Change "Operational Mode" to "ATO with 2 Sensors"
Still not working..
I changed the Level sensor 1 to inverted and it turn on the pump. and it wouldnt stop. When water level had reached.
The water passed the optical sensor and the float valve should have made it turn off and didnt ..?
Now i see the Alarm flashing for LevC 1..
Last edited by janey; 02.10.2015 at 01:29.
Vinnyyyyyyyyyyyyyy
Need your Helppppppppppppp
Bookmarks