Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: VINNY :) How do i control the Level sensors

  1. #1
    Join Date
    31.10.2009
    Location
    Tobyhanna
    Posts
    63

    Default VINNY :) How do i control the Level sensors

    Hi Everyone.
    I finally got the level splitter PL-0081.
    I have the float and optical , and a small pump connected to Socket 17 .
    Here are some pics , How do i get the ATO to work when water levels go low..



    Last edited by janey; 29.09.2015 at 21:54.

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi Janey,

    Please change S17 to "Fill Water 1"

  3. #3
    Join Date
    31.10.2009
    Location
    Tobyhanna
    Posts
    63

    Default

    OK Done.. And what about in the Level and Timer section.? Do i have to do anything in there ?

    Thanks
    Vinny

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Make sure you set the "Maximum On-time" in the Level 1 setting.

    Also, set sensor 2 to inverted. You can do this by going to the "Level" settings, scrolling down, and double-clicking on "Inverted". Select, "Yes"

  5. #5
    Join Date
    31.10.2009
    Location
    Tobyhanna
    Posts
    63

    Default

    Hi , I Cant find sensor 2 to inverted >?????

    Last edited by janey; 30.09.2015 at 17:56.

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Right where you have Sensor 2 selected, hover over to Inverted 2 and quickly click 3 or 4 times on the "NO". There will be a drop down box with the option to choose "YES". Save your settings once you've made that change.

  7. #7
    Join Date
    31.10.2009
    Location
    Tobyhanna
    Posts
    63

    Default

    ok got it.. But still nothing its not working .??



    Last edited by janey; 30.09.2015 at 18:25.

  8. #8
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Change "Operational Mode" to "ATO with 2 Sensors"

  9. #9
    Join Date
    31.10.2009
    Location
    Tobyhanna
    Posts
    63

    Default

    Still not working..
    I changed the Level sensor 1 to inverted and it turn on the pump. and it wouldnt stop. When water level had reached.
    The water passed the optical sensor and the float valve should have made it turn off and didnt ..?


    Now i see the Alarm flashing for LevC 1..
    Last edited by janey; 02.10.2015 at 01:29.

  10. #10
    Join Date
    31.10.2009
    Location
    Tobyhanna
    Posts
    63

    Default

    Vinnyyyyyyyyyyyyyy
    Need your Helppppppppppppp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •