Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: New GHL Control Center version 1.0.7.5 for Mitras, ProfiLux and GHL Doser 2

  1. #1
    Join Date
    13.11.2013
    Posts
    1,001

    Beitrag New GHL Control Center version 1.0.7.5 for Mitras, ProfiLux and GHL Doser 2

    ...is available now.

    The following changes were made in the GHL Control Center version 1.0.7.5:
    • myGHL for ProfiLux added
    • ProfiLux firmware version 6.19 added
    • Further improvements


    The following changes were made in the ProfiLux firmware version 6.19:
    • myGHL added


    Attention, backup your settings before you update and check your settings after the update.

    You can find the new GHL Control Center version in our download area.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  2. #2
    Join Date
    13.11.2013
    Posts
    1,001

    Default

    Hi,

    how do you connect with your ProfiLux?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    26.05.2014
    Posts
    37

    Default

    I used USB. But during my third try I did not received any error message any more. Maybe something on my end since I'm using a Mac with Paralells and Windows installation.

  4. #4
    Join Date
    25.12.2012
    Posts
    55

    Default

    I think i am having the same issues with windows, have to try multiple times for a connection. finally have success with a USB but not with RJ45.
    Could this be the FW?

  5. #5
    Join Date
    25.12.2012
    Posts
    55

    Default

    Quote Originally Posted by swezoo View Post
    I used USB. But during my third try I did not received any error message any more. Maybe something on my end since I'm using a Mac with Paralells and Windows installation.
    May i ask what version of windows you are running?

  6. #6
    Join Date
    26.05.2014
    Posts
    37

    Default

    Quote Originally Posted by The Codfather View Post
    May i ask what version of windows you are running?
    I'm using Windows 10.

  7. #7
    Join Date
    25.12.2012
    Posts
    55

    Default

    Quote Originally Posted by swezoo View Post
    I'm using Windows 10.
    Im thinking its windows 10. I never had any problems prior to windows 10 for hook up. Updated both FW and GCC to latest versions, never a problem with 8.1. now, have to try two-three times with USB to get a stable link. Still havent been able to hook up through RJ45, which is how I normally run with day to day viewing.

  8. #8
    Join Date
    18.08.2015
    Posts
    6

    Default

    Hi,

    I updated my Control Center to 1.0.7.5 and my Profilux 3.1T eX to 6.19
    Then I created a new myGHL account and confirmed the new account.
    After login I tried to add my Profilux as a new device.
    But after inputing my MyGHL-ID from Control Center - System - myGHL to the input field on the webpage and click on the Verify Button I got an error message "MyGHLID already assigned to an another User".
    Could you please help me to solve this problem?
    Thanks
    Heribert

  9. #9
    Join Date
    21.09.2011
    Location
    Southampton
    Posts
    389

    Default

    Quote Originally Posted by Artur View Post
    ...is available now.

    The following changes were made in the GHL Control Center version 1.0.7.5:
    • myGHL for ProfiLux added
    • ProfiLux firmware version 6.19 added
    • Further improvements


    The following changes were made in the ProfiLux firmware version 6.19:
    • myGHL added


    Attention, backup your settings before you update and check your settings after the update.

    You can find the new GHL Control Center version in our download area.

    Is this beta or final release please

  10. #10
    Join Date
    30.06.2013
    Posts
    111

    Default

    Beta, ref other post on the forum.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •