Results 1 to 10 of 10

Thread: New GHL Control Center version 1.0.7.4 for Mitras, ProfiLux and GHL Doser 2

  1. #1
    Join Date
    13.11.2013
    Posts
    1,001

    Beitrag New GHL Control Center version 1.0.7.4 for Mitras, ProfiLux and GHL Doser 2

    ...is available now.

    The following changes were made in the GHL Control Center version 1.0.7.4:
    • myGHL changes for new platform
    • GHL Doser 2 Standalone Firmware version 1.13 added
    • Further improvements



    The following changes were made in the GHL Doser 2 firmware version 1.13:
    • Switch to new myGHL platform



    Attention, backup your settings before you update and check your settings after the update.
    (After the update: Save your wifi/ lan settings and wait until the Logo changes the color from white to an another color and restart the doser.)


    You can find the new GHL Control Center version in our download area.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  2. #2
    Join Date
    14.01.2010
    Posts
    101

    Default

    Can we update via wifi or only USB?

  3. #3
    Join Date
    13.11.2013
    Posts
    1,001

    Default

    Hello,

    it is only possible via USB.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  4. #4
    Join Date
    14.01.2010
    Posts
    101

    Default

    OK thanks. Updated to 1.13. Registered for new myGHL account and verified. Go to add new device and says its not connected to myGHL?

  5. #5
    Join Date
    13.11.2013
    Posts
    1,001

    Default

    Please follow the steps in this thread: http://forum.aquariumcomputer.com/sh...5205#post65205
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    21.09.2015
    Posts
    9

    Default

    is it best to update the firmware before updating the software or does it not matter?

  7. #7
    Join Date
    25.12.2012
    Posts
    55

    Default

    This will depend on how old your FW is. You may have to step through to update, as GCC only runs newer FW.

  8. #8
    Join Date
    21.09.2015
    Posts
    9

    Default

    I have had the controller since January and haven't done any updates yet.

  9. #9
    Join Date
    25.12.2012
    Posts
    55

    Default

    If you are running GCC already, then im sure it wouldnt matter which you updated first. I did the same a few weeks ago and updated FW to latest. Yesterday I updated the GCC to 1.0.7.4.

  10. #10
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    You can go ahead and download the latest version of GCC and then do the firmware update.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •