Connection Issues

[HamzaLH]

I am trying to connect the profilux to the Mitras, but not having much luck.

The PWC card is recognised by profilux, and lights are set to wireless and slaves.

Both set to Channel 11
Profilux - Address 1
Mitras Address 2

I am adjusting light settings and the light doesnt do anything.

When I use the actual profilux unit and go to light demo then the light does cycle through all the leds, but the other functions arent working.

Any ideas?

[Artur]

Hello,

please try to set the Address to 1 and check the energy options of the Mitras.
Go to Illumination -> Light Scenarios, check "Activate manual illumination" and change the channels to see if the Mitras reacts.

[HamzaLH]

Artur,

I changed the address to 1

There us no Light scenario under Illumination.

[HamzaLH]

Sorry, I found scenarios, it has the box checked.

[Artur]

Is the green light on the PWC card flashing?

[HamzaLH]

It was yesterday, today only the red light is flashing.

I also tried a few different channels, but nothing.