Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: propel breeze L1 interface

  1. #11
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    the deviation setting is available for firmware 4.05 - maybe you make an update for the ProfiLux

    testing: only one way - set the 1-10V-port in question to function "illumination", the change the brightness manually in the "light scenarious"

  2. #12
    Join Date
    07.03.2009
    Posts
    13

    Default lack of

    so muck for support

  3. #13
    Join Date
    07.03.2009
    Posts
    13

    Default Thanks for reply

    Thank you for a reply. It popped up just now. S you are saying that the version of firmware is the problen with the temp deviation setting

  4. #14
    Join Date
    07.03.2009
    Posts
    13

    Default

    Can I upgrade firmware straight to most recent or do you have to go one update at a time

  5. #15
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    The firmware is not the problem just the function was not made available until later versions.

    You can go direct to the latest.


    GHL ProfiLux Canada/USA Distribution and support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •