propel breeze L1 interface

[Brandon]

I am trying to hook up my breeze controller, but having a bit of trouble on the software side of it. I'm not quite sure how the port knows to take it's q from the cooling channel when the only setting is tempature but nothing more specific and on the tempature screen the 1-10v interface option is not accesable. Where have i gone wrong, any help appreciated.

[aqua_digital]

Go to 1-10V interface screen

Set an L port to temp1 cooling

This port will now react to your cooling temp settings in the temperature control screen that you have designated

[Brandon]

When I go int the 1-10v interface menu the fist option only has the sensors controls (e.g. tempature1,ph1,redox1) it does not say chiller or heater and the second option only has controller output and nothing else under that menu. goodmorning

[aqua_digital]

sorry thats what I meant set to controller output. Assuming you are using a fan breeze controller.

Now go to the temp screen and you will see a box labelled 1-10V output.....

[Brandon]

When i go to the temp screen i see the 1-10v deviation setting but it is not activated or is in the background.

[aqua_digital]

providing you have set an L port to temp 1 controller output and saved that setting, in the temp screen the feature should not be greyed out.

Just done the exact same thing on mine and it is fine.