help me with Return Pump Control please

[cloud747]

Hello

I want to set a low water level control for my return Pump, if water level goes to low in the Pump Partition , i want to stop the Return Pump to protect it.
I set level Sensor as "Return Pump" and the sensor located in low postion of the Return Pump Partition, the socket for Pump ist set as "fill water" with that Sensor.
the problem ist , wenn the Water level goes too low, GHL switched off Return Pump , but the Water goes back from the Main Tank to Sump and water Level goes high again , and Return Pump works again , and level goes down to low postion and switched off the Return Pump, and the story goes again and again.
The level sensor doesnt trigger alarm, i want GHL switch off the return Pump and remains it stop until i reset the error. but ther ist no such kind of settings. the pump works again immdiatly when water level goes higher again.
How can i set this kind of Protect for my return Pump?

Thank you in advance!

Mark

[cloud747]

anyone can help me?

[Antipodes]

I have looked at this and don't see away to do this.
The system is designed to reset it self once the problem disappears.
They base the system on auto top up.

Even with a digital card with a float on it does not allow for this capability.

Maybe a neptune Apex would be able to do this!