Zeige Ergebnis 1 bis 2 von 2

Thema: "False" alarms

  1. #1
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    172

    Standard "False" alarms

    Hi everyone

    Sometimes a SMS module from one of my systems send out a general alarm and when I check the computer directly after the alarm - there is no alarm. I have traced the problem and have found that its very short communication errors that cause this "false" alarms. I get some PAB errors for app 1-10 sec.

    Is there any function in the SMS box that can give me a possibility to delay the alarm? - Other alarm systems I have been working with have given me an opportunity to set a delay time. As an example - I want the alarm to consist at least 30 sec before the unit send out the alarm - I set 30 seconds as a delay function and if the alarm not is active after 30 sec - the unit will not send out any alarms. If there is not such a function – I would be very happy if you could incorporate this in your SMS module. Some of the systems I work with are 20 km apart from my home 

    Sincerely Lasse

  2. #2
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    172

    Standard

    Anyone - any ideas?

    Sincerely Lasse

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •