Results 1 to 2 of 2

Thread: "False" alarms

  1. #1
    Join Date
    24.01.2011
    Location
    Bohus, Sweden
    Posts
    184

    Default "False" alarms

    Hi everyone

    Sometimes a SMS module from one of my systems send out a general alarm and when I check the computer directly after the alarm - there is no alarm. I have traced the problem and have found that its very short communication errors that cause this "false" alarms. I get some PAB errors for app 1-10 sec.

    Is there any function in the SMS box that can give me a possibility to delay the alarm? - Other alarm systems I have been working with have given me an opportunity to set a delay time. As an example - I want the alarm to consist at least 30 sec before the unit send out the alarm - I set 30 seconds as a delay function and if the alarm not is active after 30 sec - the unit will not send out any alarms. If there is not such a function – I would be very happy if you could incorporate this in your SMS module. Some of the systems I work with are 20 km apart from my home 

    Sincerely Lasse

  2. #2
    Join Date
    24.01.2011
    Location
    Bohus, Sweden
    Posts
    184

    Default

    Anyone - any ideas?

    Sincerely Lasse

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •