Results 1 to 5 of 5

Thread: Firmware update

  1. #1
    Join Date
    22.07.2014
    Posts
    15

    Default Firmware update

    Hi,

    Is it already possible to upgrade the Profilux firmware via LAN connection? My upgrade via serial/USB always fails and I need to do the recovery procedure to get the Profilux alive again.

  2. #2
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Hello,

    no, presently it's still not possible to perform the firmware update via LAN.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    I had the same problem with LAN / WLAN. Only after removing the network cable to the ProfiLux, I was able to perform the update via USB

  4. #4
    Join Date
    03.12.2009
    Posts
    188

    Default

    Quote Originally Posted by jasperb View Post
    Hi,

    Is it already possible to upgrade the Profilux firmware via LAN connection? My upgrade via serial/USB always fails and I need to do the recovery procedure to get the Profilux alive again.
    I was having this problem (failed updates and having to do a recovery). I found that if I power cycle the Profilux before I do an update, that it updates as expected.
    Not sure if this will help, but it may.
    Stay up to date with my efforts at Blue Tang Breeding here http://facebook.com/RegalTangBreeding and Mccullochi Clownfish Breeding here https://www.facebook.com/MccullochiClownfishBreeding

  5. #5
    Join Date
    14.12.2014
    Posts
    28

    Default

    Hi,

    I've just updated the firmware with an USB over ethernet connection. I've attached the GHL USB-Port to my Fritz!Box and used the remote USB function of the box.

    Best regards,
    Joerg.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •