Results 1 to 10 of 10

Thread: Wieviel lightbars aquarium 200x80x80

  1. #1
    Join Date
    09.06.2014
    Posts
    13

    Default Wieviel lightbars aquarium 200x80x80

    Ich will ein Süßwasser-Aquarium 200x80x80 (Wasserstand 70) mit Leichtigkeit Ghl Mitras Light 100cm Ich fahre mit dem Profilux 3.1. Ich denke, von 8 bar. Das ist mehr als genug, oder sollte ich etwa 10 bar vor? Und nehmen Sie den ganzen Daylight oder sogar einen Teil Ozeanblau?

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Ich hoffe, ich habe alles richtig verstanden.
    8 Lightbars sind mehr als genug. Ich würde eine Mischung aus Daylight und Oceanblue nehmen.
    Zum betreiben von mehr als 4 Lightbars brauchst du noch spezielles Zubehör, da die eine RS232 Schnittstelle max 4 Lightbars steuern kann.

  3. #3
    Join Date
    12.07.2012
    Posts
    33

    Default

    Wir haben in unserem 200x60x70cm Becken 4 Lightbars mit 1m verbaut.
    Fahre aktuell mit 90% Helligkeit.
    Für unser Becken ist das mehr wie ausreichend.
    Ich würde es bei deinem Becken erst mal mit 6 LB ausprobieren.
    Die Netzteile aber gleich für 8 St. auslegen.
    Nachkaufen kannst du immer noch.

  4. #4
    Join Date
    09.06.2014
    Posts
    13

    Default

    Quote Originally Posted by PIWAWT View Post
    Ich hoffe, ich habe alles richtig verstanden.
    8 Lightbars sind mehr als genug. Ich würde eine Mischung aus Daylight und Oceanblue nehmen.
    Zum betreiben von mehr als 4 Lightbars brauchst du noch spezielles Zubehör, da die eine RS232 Schnittstelle max 4 Lightbars steuern kann.
    I have connected an Eheim interface to the RS232. That's why I need to buy at least one additional RS232 card. What is technically preferable: two additional RS232 cards or one Active Splitter and one RS232 card?

  5. #5
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    you need a RS232 Card and a active Splitter. The Eheim Interface is a problem. The lightbars works correctly, but the Eheim make problems. Look this tread

  6. #6
    Join Date
    09.06.2014
    Posts
    13

    Default

    Hallo PIWAWT,
    Thanks for your advice. Which combination of daylight and Oceanblue do you prefer and what are the positions of the different types of lightbars in the aquarium hood?

  7. #7
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Ocean blue _________¦__________plants,deep
    Daylight _________¦__________plant, middle and high
    Daylight _________¦__________plants, middle and high
    Ocean blue _________¦__________plants, deep

  8. #8
    Join Date
    09.06.2014
    Posts
    13

    Default

    In a few days I will start with the installation of my tank with the Lightbars as proposed by PIAWT.
    I'm looking now for à light composer project for the first weeks and one for the stable situation. Of course I Will adapt .them in the future but a starting point would be nice

  9. #9
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Here's a save Projectfile
    Start your Lightbars with 50% and increasing gradually the performance over a month to 75%

    rob2211.png rob2211.zip

  10. #10
    Join Date
    09.06.2014
    Posts
    13

    Default

    Thanks for the projectfile. Unfortunately the delivery of my new tank had been postponed. So I can not use/test the file at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •