Hello,
do you see the expansionbox if you navigate directly on the ProfiLux to System -> Configure PAB -> Assign devices?
If you can see the expansion box than mark it with a X and assign it.
IF you still don't see the box, please try to connect the expansionbox without the powerbar and check if you can assign it.
As second step you can try to do a pab reset directly on the ProfiLux (System -> Confirgure PAB ->PAB System reset) and try to assign the box.
The last thing you can try is to do an emergency update of the expansion box. You can download the firmware in our download area.
For the update you must unplug all other PAB devices and only connect the expansion box.
You can start the firmware update with GHL Control Center and follow the instructions:
pab emergency-update.jpg
No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.
Bookmarks