Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Antworten
    5
    Hits
    207

    Yes, please recalibrate. If the issue...

    Yes, please recalibrate.

    If the issue persists, please create a support ticket and include the above screenshots.
  2. Antworten
    4
    Hits
    159

    Hi Scott, Since this will only be for ON/OFF...

    Hi Scott,

    Since this will only be for ON/OFF control, no in-between, you can wire-up a normal plug to it and connect it to the powerbar socket. This socket is then assigned with the pH control...
  3. Antworten
    5
    Hits
    207

    Can you please post a screenshot of your...

    Can you please post a screenshot of your settings?
    If you temporarily disable this sensor port, save changes, then re-enable, does the alarm come back?
  4. Antworten
    1
    Hits
    224

    Please open a support ticket for further...

    Please open a support ticket for further assistance with this.
  5. Thema: Tunze cables?

    von Vinny
    Antworten
    2
    Hits
    280

    The splitter is not necessary, but does have its...

    The splitter is not necessary, but does have its advantages because it lets you save a 1-10V port on your controller and lets you keep an open port if you end up needing to control another 1-10V...
  6. Antworten
    1
    Hits
    228

    Please open a support ticket if you haven't done...

    Please open a support ticket if you haven't done so already.
  7. Antworten
    4
    Hits
    536

    Hanna checkers are not a reliable cross reference...

    Hanna checkers are not a reliable cross reference due to the variables this instrument has compared to the KHD. If you want to verify KHD accuracy, it is best done with the 7.5 dkH Reference fluid.
    ...
  8. Antworten
    4
    Hits
    536

    A new probe should be purchased as leaving it...

    A new probe should be purchased as leaving it inside the KHD without using it is not the proper way to store it after that long.
  9. Antworten
    3
    Hits
    264

    Temporarily set the speed to (1), save and test....

    Temporarily set the speed to (1), save and test.

    Set the speed back to (0), save, recalibrate, save and test.
  10. Antworten
    3
    Hits
    264

    Hi Ronald, Can you please include a screenshot...

    Hi Ronald,

    Can you please include a screenshot of your dosing schedule settings?
  11. Thema: length

    von Vinny
    Antworten
    3
    Hits
    271

    Yes, 15 meters.

    Yes, 15 meters.
  12. Thema: length

    von Vinny
    Antworten
    3
    Hits
    271

    About 15m.

    About 15m.
  13. Antworten
    1
    Hits
    401

    That looks good to me. The measurement cell is...

    That looks good to me.

    The measurement cell is best placed in a by-pass anyway.
  14. Antworten
    4
    Hits
    544

    We have added a section to our STDL4-4 setup...

    We have added a section to our STDL4-4 setup article which covers this very topic:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-stdl4-4-powerbar-to-profilux/

    See Troubleshooting...
  15. Antworten
    4
    Hits
    392

    There were some units from a few years ago which...

    There were some units from a few years ago which were assembled with caps outside of their tolerances. If the original owner replaced the caps and can show the pumps running without any jamming or...
  16. Antworten
    4
    Hits
    392

    The sale date would be based on the date written...

    The sale date would be based on the date written on the sales receipt. For warranty purposes, if one is not available, then we would go by the build date of the device. It looks like this one was...
  17. The tank size per light is a very rough estimate...

    The tank size per light is a very rough estimate since every tank will hold different types of plants and coral, each having their own set of lighting preferences. If you would prefer to have more...
  18. Hello, Yes, you can run an AWC / ATO task...

    Hello,

    Yes, you can run an AWC / ATO task using 2 sensors. The upper sensor can be doubled-up as your ATO sensor too. More information on that can be found here:...
  19. Antworten
    1
    Hits
    200

    Any 1-10V compatible pump can be used alongside...

    Any 1-10V compatible pump can be used alongside the P4 controller. Take a look at the Tunze NanoStream 6040 pump which is controllable via the P4. You can use this an a GHL Tunze 1 cable to control...
  20. Antworten
    1
    Hits
    199

    Adding an O2 probe and expansion card will give...

    Adding an O2 probe and expansion card will give you more insight on how that parameter changes throughout the day. It would also be useful because the ProfiLux can notify you if the desired O2 level...
  21. Antworten
    4
    Hits
    277

    For pH control, you would only need the CO2 tank,...

    For pH control, you would only need the CO2 tank, solenoid (plugged into the powerbar), and pH probe.

    Within the ProfiLux you would set your desired pH value and hysteresis. Based on those...
  22. Antworten
    1
    Hits
    517

    Hola, Ese modelo de Jebao no es compatible con...

    Hola,

    Ese modelo de Jebao no es compatible con 1-10v.
  23. Hi there, If you're going to do mostly...

    Hi there,

    If you're going to do mostly high-light demanding plants, 4x 7006 fixtures would be ideal since it will put out that extra bit of light necessary for those plants. This option would also...
  24. Antworten
    1
    Hits
    196

    Due to safety concerns, Powerbars should never be...

    Due to safety concerns, Powerbars should never be serviced by the user. Open a support ticket for further assistance.
  25. Antworten
    3
    Hits
    516

    You're welcome! :)

    You're welcome! :)
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4