Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden; generiert vor 25 Minute(n).

  1. Antworten
    6
    Hits
    74

    There was no need to restart the ProfiLux because...

    There was no need to restart the ProfiLux because you are doing an emergency update only on the Powerbar.
    If you clicked the EXTRAS tab at the top of the GCC screen, there will be 2 options that say...
  2. Yes. With Gate 6, you are combing the commands...

    Yes.
    With Gate 6, you are combing the commands from PL4 and PL5. Since PL4 includes a function from PL3 (Skimmer delay), this is included also.
  3. Antworten
    6
    Hits
    74

    1. Connect to your ProfiLux via USB 2....

    1. Connect to your ProfiLux via USB
    2. Disconnect ALL PAB devices, except the Powerbar-6E
    3. Make sure the powerbar is powered ON
    4. Click the Extras tab and select Firmware update in the PAB...
  4. Antworten
    7
    Hits
    69

    If you already downloaded the ESP update tool,...

    If you already downloaded the ESP update tool, you would need to go into that folder to open the tool.
  5. Antworten
    7
    Hits
    69

    Ok. Please follow the alternate steps for...

    Ok.

    Please follow the alternate steps for updating the WiFi module:

    https://www.youtube.com/watch?v=6z_7fhzJL-Q
  6. Antworten
    2
    Hits
    46

    You can use the same power supply but with 220v...

    You can use the same power supply but with 220v connector.
  7. Antworten
    3
    Hits
    92

    No problem. :) Yes you can definitely have the...

    No problem. :)

    Yes you can definitely have the KHD control a pump that is dosing alkalinity supplement.
    You would first need to setup a dosing schedule for that pump head. Afterwards, give the...
  8. Antworten
    7
    Hits
    69

    Have you tried restarting the app and power...

    Have you tried restarting the app and power cycling the P4?
  9. Yes, that looks fine to me. PL #6 is what you...

    Yes, that looks fine to me.

    PL #6 is what you would assign to the skimmer socket.
    That single gate now combines the maintenance delay AND the command you created in PL gate 4.
  10. Antworten
    7
    Hits
    69

    The WiFi module firmware is no longer located...

    The WiFi module firmware is no longer located within the GCC directory, it is now a separate download.
    We have an updated video which show you how to do the update:
    ...
  11. Antworten
    3
    Hits
    92

    First step would be to determine your average KH...

    First step would be to determine your average KH needs through normal dosing schedule step. The KHD would not be involved yet.
    Once you have found the neccessary dosage to maintain KH within a...
  12. We have a video which shows you how to setup the...

    We have a video which shows you how to setup the KHD for KH control...is this what you mean?

    https://www.youtube.com/watch?v=euXBpc0YILs
  13. We have this section explained in our P4 Resource...

    We have this section explained in our P4 Resource Guide, page 110.
    Check it out if you want to see it with pictures of the steps.

    How to create a socket delay after maintenance mode ends
    ...
  14. Antworten
    11
    Hits
    179

    Hello Rocco, There is no one-size-fits-all...

    Hello Rocco,

    There is no one-size-fits-all recommendation for setting KH control. It all depends on tank size, coral load, lighting, too many variables...

    We have a video here which explains...
  15. Antworten
    6
    Hits
    168

    Please open a support ticket for further...

    Please open a support ticket for further assistance.
    Include screenshots of your existing Doser WIFI settings and network settings.
  16. Antworten
    7
    Hits
    3.623

    You can still use that apex cable by cutting the...

    You can still use that apex cable by cutting the RJ45-end and connecting the two wires to our Breakout box accessory. This accessory then connects directly to the 1-10V port on the ProfiLux.
  17. Antworten
    6
    Hits
    168

    Steps for setting up the doser with a Static IP...

    Steps for setting up the doser with a Static IP can be seen here:

    https://www.youtube.com/watch?v=5D7KxXiLuO0
  18. Antworten
    6
    Hits
    168

    When the doser was set to Access Point mode, were...

    When the doser was set to Access Point mode, were you able to see the GHL-DOSER hotspot signal on your phone or tablet?
    If yes, then the WiFi chip is working normally.

    Not being able to connect...
  19. https://www.youtube.com/watch?v=UN8v3X48eiw

    https://www.youtube.com/watch?v=UN8v3X48eiw
  20. Antworten
    5
    Hits
    102

    Please follow our part 3 KHD setup video for...

    Please follow our part 3 KHD setup video for proper setup instructions.
    This is likely a result of incorrect pump calibration values.
  21. Assuming this is a Standalone Doser you are...

    Assuming this is a Standalone Doser you are trying to connect to the P4...this doser must first be set to SLAVE mode. This can be done by connecting directly to the doser's hotspot or connecting via...
  22. We need more information to better assist you. ...

    We need more information to better assist you.

    Are you connecting over USB or WiFi?
    If USB, did you check to see if windows installed the correct USB driver?
    If not, follow these steps to...
  23. Antworten
    6
    Hits
    218

    If you can already connect to the device from the...

    If you can already connect to the device from the cloud and from the app, then yes, this is not a WiFi issue.
    Have you closed GCC, reopened and tried again?

    You can also increase the network...
  24. Antworten
    6
    Hits
    218

    Kenny, When you have the update tool opened,...

    Kenny,

    When you have the update tool opened, select "Erase File System". After that is completed, reconnect to your device and re-enter your WiFi settings. At this time, you should also see the...
  25. Hello, If this is still an issue, please...

    Hello,

    If this is still an issue, please create a support ticket for further assistance.
Zeige Ergebnis 1 bis 25 von 499
Seite 1 von 20 1 2 3 4