Suchen:

Art: Beiträge; Benutzer: Mortie31

Seite 1 von 2 1 2

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Antworten
    2
    Hits
    417

    Sorry all seems ok now

    Sorry all seems ok now
  2. Antworten
    2
    Hits
    417

    Sorry not connected as client box checked, that...

    Sorry not connected as client box checked, that is, it’s the access point box that is unchecked.
  3. Antworten
    2
    Hits
    417

    New WiFi ESP download potential issue

    Anyone else having issues after downloading today’s WIFI esp update. I saved it to my laptop as usual and used the upgrade tool, all went well, restarted my P4 and now I cannot connect to WiFi unless...
  4. Mine starts at 5.5 then rises to tank ph8.2 then...

    Mine starts at 5.5 then rises to tank ph8.2 then drops quickly as soon as the reagent is added.. down to 6.5 after about 30secs and carries on dropping
  5. If you have the latest GCC 1116 on the KHD page...

    If you have the latest GCC 1116 on the KHD page at the bottom you can see the ph readings, these should change as the reagent is added, during measurement. You should also be able to feel/see a...
  6. It was the internal circulation pump that had...

    It was the internal circulation pump that had failed
  7. Antworten
    3
    Hits
    1.167

    I use a maxi doser to AWC, I simply pump clean...

    I use a maxi doser to AWC, I simply pump clean salt water in and tank water out simultaneously. I place the water out tube in my middle sump chamber and pump the clean salt water into my return...
  8. Thanks, unfortunately it isn’t that, it’s now...

    Thanks, unfortunately it isn’t that, it’s now showing an error message of Titration took to long and constantly reading 0dkh, I’ve emailed ghl support and I’m sure they will sort it.
  9. Hello Matthias I left my director measuring...

    Hello Matthias
    I left my director measuring throughout the day as stated above, I'm now getting consistant readings of0dkh!!! Is this working perfectly??? ill send in to customer service now.
  10. Hi Matthias as said above in my original post I...

    Hi Matthias as said above in my original post I have recalibrated everything, if the level hadn’t dropped from the usually measured 7.4 to 4.0 so quickly I wouldn’t of posted, and as I said in my...
  11. KH Director just giving measurement of 4dkh!!!!

    I’ve had my KH director for over 3 months and now I’ve got a new problem, 2 days ago it gave me a measurement of 4dkh and has continued to give this result in 8 subsequent measurements. My actual...
  12. KHD measurement button not working in MyGHL

    Hello
    I’ve just tried to manually start a KHD measurement from myghl on my iPad and the button doesn’t work it is actually a pale blue colour rather1063510635, the maintenance buttons are a deeper...
  13. I’d try it, also did you add correct internal...

    I’d try it, also did you add correct internal size of tube? If so and still not emptying id recalibrate and remeasure
  14. You don’t want any, did you measure the tube from...

    You don’t want any, did you measure the tube from the KH Director to dosing pump + tube in doser head + pipe to tank?
  15. Antworten
    47
    Hits
    4.112

    The Teflon tubing wasn’t suitable, too rigid, I...

    The Teflon tubing wasn’t suitable, too rigid, I have now gone for 7mm o.d. And 4mm I.d. Silicon tube and the bubbles are forming far less, and so far I’ve had no bad readings in the last 10 days. Is...
  16. Antworten
    47
    Hits
    4.112

    I’ve just ordered this......

    I’ve just ordered this...
    https://www.amazon.co.uk/Meters-Teflon-Filament-Printer-Rostock/dp/B018EC80V6/ref=sr_1_7/260-5693994-5704758?ie=UTF8&qid=1521923271&sr=8-7&keywords=ptfe+teflon+tube
  17. Any news on an update on the container size??

    Any news on an update on the container size??
  18. Antworten
    3
    Hits
    512

    So it seems your getting a low reading of -...

    So it seems your getting a low reading of - 0.6KH, this seems to be where mine is as well when cross referenced with my hanna and Elos kits, trouble is which one is correct? At least my results are...
  19. Antworten
    47
    Hits
    4.112

    Thanks Matthias

    Thanks Matthias
  20. Antworten
    47
    Hits
    4.112

    Ive been having exactly the same issue, posted in...

    Ive been having exactly the same issue, posted in R2R about it, wonder where there coming from. I even changed reagent bottle in case first one was contaminated and somehow causing bubbles to form in...
  21. Antworten
    14
    Hits
    1.605

    I would buy salinity calibration fluid at 35ppt...

    I would buy salinity calibration fluid at 35ppt and calibrate your refractometer with that, IMO RO water or sterilised water or any such liquid doesn’t give accurate calibration as it’s set point (ie...
  22. Antworten
    7
    Hits
    882

    Micro bubbles forming in reagent tube??

    Hello is anyone else suffering with bubbles in there reagent tube?. My bottle is directly below my dosing pump and the tube is 6” long with no kinks and flows in virtually a straight line to the pump...
  23. Maxi doser container size setting to small for AWC

    Hello
    I’ve just bought a maxi doser to use to change salt water, is there a way to increase the container size bigger than 30000ml ? I could ideally do with 200000ml ish rather than the 30L allowed....
  24. Antworten
    13
    Hits
    1.314

    I’ve updated both gcc and fw, now I have no...

    I’ve updated both gcc and fw, now I have no connection with any PAB devices, I’ve transmit all saved settings back into gcc, but no power bars work, even though all settings are correct help please
  25. Antworten
    13
    Hits
    1.314

    Hi Vinny Here u go show screen pics, this is how...

    Hi Vinny
    Here u go show screen pics, this is how the doser looks after assigning, is you can see it has the icon of the touch it’s pab cable is attached to and as you can see I cannot configure the...
Zeige Ergebnis 1 bis 25 von 42
Seite 1 von 2 1 2