Suchen:

Art: Beiträge; Benutzer: Archid

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Profilux Terra humidity sensor works inverted now?

    Hello all,

    I've had a running Profilux II terra for 10+ years now and since last week I've noticed quite a bit of condensation on the windows. If I connect to my PC and get the readout I see that...
  2. Thema: Sensor reset ?

    von Archid
    Antworten
    8
    Hits
    1.068

    the card? you mean the entire profilux 2 terra?...

    the card? you mean the entire profilux 2 terra? this one does not have seperate cards...

    I'm assumuming this falls under warrenty then, since only original devices were used.
  3. Thema: Sensor reset ?

    von Archid
    Antworten
    8
    Hits
    1.068

    there is no extension, only the sensor itself.

    there is no extension, only the sensor itself.
  4. Thema: Sensor reset ?

    von Archid
    Antworten
    8
    Hits
    1.068

    Updated firmware to 5.11 and updated controll...

    Updated firmware to 5.11 and updated controll center. Still getting 0.0 values.
    Opened the Profilux case to check the connector and I can visually confirm the cable connector and the socket are...
  5. Thema: Sensor reset ?

    von Archid
    Antworten
    8
    Hits
    1.068

    I could not find anything wrong with the sensor,...

    I could not find anything wrong with the sensor, but I figured it might have been broken for an unknown reason, so I ordered a new temp/humid sensor.

    It just arrived per mail today and I just...
  6. Thema: Sensor reset ?

    von Archid
    Antworten
    8
    Hits
    1.068

    Sensor reset ?

    Hello,

    I have a profilux Terra and it's wired with a temp/humidity sensor. It was working just fine but when I just took the power off the profilux to change the wires to the lights and turned it...
  7. Antworten
    4
    Hits
    879

    Ok, it does accept the time changes I've made but...

    Ok, it does accept the time changes I've made but now comes another problem. I have set the Propellor Controller to L3, and in 1-10v Outputs I've set L3 to Humidity Output Controll. This works 2...
  8. Antworten
    4
    Hits
    879

    As your question wether I programmed manually or...

    As your question wether I programmed manually or with software hinted me in the difference I have now set it manually in the Profilux. It seems that this setting does not reset and should be fine...
  9. Antworten
    4
    Hits
    879

    Thanks for the reply. The thunderstorm does not...

    Thanks for the reply. The thunderstorm does not controll any LEDs, I dont have any connected. When a Thunderstorm activates it would dim the lights and turn on the sprayer (Socket 1). I have...
  10. Antworten
    4
    Hits
    879

    P2 Terra Humidity nocturnal change

    I've just received my P2 Terra this week and it's been a rollercoaster ride to get it up and running the way I wanted it. Had a bunch of trouble with the lights, turns out the EVG-AP-2F had a bad...
  11. Antworten
    5
    Hits
    969

    Thank you for this confirmation Carolin, this is...

    Thank you for this confirmation Carolin, this is what I was afraid of.
    I'm not worried about the config of the WLAN, I am experienced with these things, but when I think about it, it's a lot of...
  12. Antworten
    5
    Hits
    969

    I went looking for the items directly in the GHL...

    I went looking for the items directly in the GHL online store instead of the retailer and couldn't find the WLAN card there ... after some digging it seems it was taken out of the productline because...
  13. Antworten
    5
    Hits
    969

    P2 Terra and wireless

    I'm about to order a P2 Terra for my vivarium/paludarium and I understand the Wireless function is optional so I would assume I need the WLAN expansion card. I just registered here in order to...
Zeige Ergebnis 1 bis 13 von 13