Suchen:

Art: Beiträge; Benutzer: Lasse

Seite 1 von 7 1 2 3 4

Suchen: Die Suche dauerte 0,00 Sekunden; generiert vor 54 Minute(n).

  1. I was wrong, it will be grayed out even in P3.1...

    I was wrong, it will be grayed out even in P3.1 if no doser above 2 or maxi doser is connected. But it is for all 16 dosers in GCC even if it is only attached to doser 1-4 (in GCC)

    Sincerely Lasse
  2. Thank you - that´s explain it. But in my 3.1T -...

    Thank you - that´s explain it. But in my 3.1T - I´m able to set a speed even if no dose2, 2.1 or dos max is connected - and further on - if I use the app or GHL connect - I can set speed in P4 too -...
  3. I have to mention that I have no physical dosers...

    I have to mention that I have no physical dosers connected yet. I use Dosing pump 16 (in the GCC) to manage a socket and Dosing pump 15 to respond on a socket (index 5). In a week I will attach...
  4. Bug in GCC 1.1.2.9? problems with dose pump speed settings

    Hi

    In the latest GCC and/or P4 firmware 7.23 can´t I set the speed of my dosing pumps. The menu can´t be reached in GCC (1.1.2.9) it is grey, not accible. However - it is possible to set the speed...
  5. Any ideas when Dynamic nominal value will be...

    Any ideas when Dynamic nominal value will be implemented into P4 yet? I switch from 3.1T just now and I miss this very good feature.

    Sincerely Lasse
  6. Antworten
    2
    Hits
    819

    Thank you Sincerely Lasse

    Thank you

    Sincerely Lasse
  7. Antworten
    2
    Hits
    819

    Dynamic value show wrong dynamiv value

    I have two pH sensors in different environment (one anaerobic and one aerobic). I need to have the anaerobic pH to follow my aerobic pH. I have set up Dynamic value 1 to be managed by the my aerobic...
  8. Antworten
    10
    Hits
    2.169

    Done that Sincerely Lasse

    Done that

    Sincerely Lasse
  9. Antworten
    10
    Hits
    2.169

    Hey guys - you have a problem. GCC with only...

    Hey guys - you have a problem. GCC with only ExpBox1 as a PAB device. It show the configuration page and you can do changes - however they seems not to be taken of the P4 - no new probes apaer or...
  10. Antworten
    10
    Hits
    2.169

    Will test first with the one with FW 7.18 - (the...

    Will test first with the one with FW 7.18 - (the other (FW 7.21) that I had problem with is in critical operations for the moment - lot of work if I would test that.) If it works with FW 7.18 I will...
  11. Antworten
    10
    Hits
    2.169

    I have a P4 with 7.18 - I´ll test tomorrow if...

    I have a P4 with 7.18 - I´ll test tomorrow if that works. Could it been any issues from 7.2 when the PAB changes was included in the app?

    Sincerely Lasse
  12. Antworten
    10
    Hits
    2.169

    I have the latest firmware on Ext-Box 1 V1.09....

    I have the latest firmware on Ext-Box 1 V1.09. The P4 firmware is 7.21 I can connect it as a PAB device but when I try to configure it (in the system view there it is displayed) it says that can´t...
  13. Antworten
    10
    Hits
    2.169

    Profilux 4 and the old expansion box

    The other day - I try to attach an old expansion box (version 1 latest firmware) to a P4 (firmware 7.21) It did not work out well. The PAB recognise the box and allowed it to be attached. When I try...
  14. Antworten
    2
    Hits
    953

    Thanks Sincerely Lasse

    Thanks

    Sincerely Lasse
  15. Antworten
    2
    Hits
    953

    KH director with dioser 2 stand alone

    Hi

    Will a combination with KH director and Doser 2 standalone work as good as the combination KH director - Doser 2.1 stand alone?

    Sincerely Lasse
  16. Antworten
    1
    Hits
    932

    wrong information message in the GCC 1.1.2.7

    When you click on the info sympol (?) in upper right corner of the new GCC (1.1.2.7) - it report itself as 1.1.2.6


    11650

    11651


    Sincerely Lasse
  17. Antworten
    21
    Hits
    3.098

    I recover rather fast - it was a surgery in the...

    I recover rather fast - it was a surgery in the stomach and I´m home from the hospital now - but my body is used of this and recover fast. it was the number 10 since 1970 and the seventh the last 20...
  18. Antworten
    21
    Hits
    3.098

    I'm working together with GHL in order to solve...

    I'm working together with GHL in order to solve this problem. However because of me being sick - it will take some time before I'm able to test in my set up. But both me and GHL is working on the...
  19. GHL Control Center 1.1.2.3 bug? according to light simulation

    Hi

    I get an error when I try to reach the simulation page below the illumination tag. Error Code 41

    Mitras light bar 2 connected to a 3.1T




    11445
  20. Antworten
    21
    Hits
    3.098

    Bump - any news? Sincerely Lasse

    Bump - any news?

    Sincerely Lasse
  21. Antworten
    21
    Hits
    3.098

    Any updates on this? Here is my logs since...

    Any updates on this?

    Here is my logs since 23/10 - today. Temp 2 is digital from Exp Box 2 and temp 1 is digital from P4. It is for sure an issue with digital temp and exp box 2


    11186
    ...
  22. Antworten
    2
    Hits
    1.050

    Yes maybe a P3 issue but I have my mitras Led Bar...

    Yes maybe a P3 issue but I have my mitras Led Bar connected to an expansion box 2 because I have no Mitras cable to a p3.1T. It could be a issue of ExpB 2 too.


    I have 2 more 1-10 working but I...
  23. Antworten
    21
    Hits
    3.098

    After a reset last day at 8:00 - things have not...

    After a reset last day at 8:00 - things have not been better


    11175

    and from 01:27 this night


    11176
  24. Antworten
    8
    Hits
    2.347

    I´m not sure if I understand what you mean but if...

    I´m not sure if I understand what you mean but if you say it can be done - it is enough for me in order to work further on with the planning and when it is time for configurating the real system in...
  25. Antworten
    21
    Hits
    3.098

    At 08:00 I did as you suggested in post 8. The...

    At 08:00 I did as you suggested in post 8. The test continue.

    I think there is some issues with the PAB in expBox2 because in two installations at the fish farm with ExpBox 2 - we have plenty of...
Zeige Ergebnis 1 bis 25 von 173
Seite 1 von 7 1 2 3 4