Suchen:

Art: Beiträge; Benutzer: diverdutch

Seite 1 von 7 1 2 3 4

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Antworten
    3
    Hits
    1.698

    GHL Connect app unstable

    Since a few weeks the GHL connect app (iPhone) is very unstable? It requires several login attempts (local or remote) to connect to PL3 with latest firmware.
    Prior to last 2 updates the app made...
  2. Antworten
    3
    Hits
    777

    Profilux3ex with lastest released firmware as...

    Profilux3ex with lastest released firmware as GCC. Also tried via pL4 afsin with latest firmware as GCC and all with same result. It see and starts the upgrade and while erasing it pops up with...
  3. Antworten
    35
    Hits
    4.267

    I hope this issue is resolved soon... also in pl3...

    I hope this issue is resolved soon... also in pl3 you need to assign passwords to admin and guest users as dedicate external port so suggest this option becomes available in app as well to avoid...
  4. Antworten
    3
    Hits
    777

    VorTech-Controller_V104

    Gents,

    in GHLControlCenter_V1106 I'm trying to upgrade the firmware of the Vortech controller from v103 to VorTech-Controller_V104. as soon as I select it starts however during erasing it stops...
  5. Antworten
    5
    Hits
    996

    if you refer to the new app, yes you can... you...

    if you refer to the new app, yes you can...
    you have to use external IP in the app settings as parallel in your router assign the PL4 local IP to the standard port 80.
    Unfortunately I've not seen...
  6. Antworten
    5
    Hits
    875

    Previous in download sector there was a tutorial...

    Previous in download sector there was a tutorial available were exactly step by step was explained how to change an led cluster of a mitras ... now i can not find that tutorial ?

    If needed you...
  7. Antworten
    5
    Hits
    875

    Txs but were is the change out schedule order...

    Txs but were is the change out schedule order that was available before ?
  8. Antworten
    5
    Hits
    875

    Mitras upgrade to 6300

    Upgrade miteas LX6200HV to LX6300...

    Were can i find the step by step manual for this upgrade and firmware ?
    Is upgrading in combo with firmware working fine, cannot aford to loose lights so...
  9. so how can I have the profilux give an alarm from...

    so how can I have the profilux give an alarm from incoming signal via the adin card?
    ?
  10. Txs vinny! How about the incoming alarm...

    Txs vinny!

    How about the incoming alarm signal itself ? How and where do i register it in PL3 that its the calcium reactor..
  11. Program incomming analog alarm from 3 party equipment ...

    Hello ghl users, im need some advise on conbecting the following.

    I have a AMS DaStaCo calcium reactor which has a alarm out connection on its Integra controller. This alarm cable goos from the...
  12. endless "start 1-4" feed mode display

    I have the same issue... as soon as I touch 1 time the display after the screen goes to "start 1-4" ...
    if pressed X it will go out but shortly followed back to start 1-4... after several power off...
  13. Antworten
    1
    Hits
    714

    Okay i think it was related to laptop i was...

    Okay i think it was related to laptop i was using.. I reinstalled all drivers and after reboot both PL3 upgraded successfully...
  14. Antworten
    1
    Hits
    714

    Firware upgrade fail

    Hi all

    Am I doing something wrong while upgrading firmware on PL3EX to 6.29?
    Im using GCC 1.0.9.2 as 4 somehow it doesnt pass the powerbar switch part and comes with following message...??
    ...
  15. Umfrage: excellent ,,, now this is why I LIKE GHL......

    excellent ,,, now this is why I LIKE GHL... always thinking with its clients.... well done GHL team!!
  16. Umfrage: Hi GHL team... Any news on a modular upgrade...

    Hi GHL team...

    Any news on a modular upgrade kit for LX6 lightings to the new LX7 ?
    I think more intrest will develop over time while LX7 is rolling out.

    Please note that one of GHL strong...
  17. Umfrage: Yea interested... i have 3 units...

    Yea interested... i have 3 units...
  18. Antworten
    23
    Hits
    8.951

    Im a bit surprises ghl anouching the PL 4 at...

    Im a bit surprises ghl anouching the PL 4 at mecna?

    As many have asked several times if theres a PL4 forthcoming as most customers don't wanna buy a model (pl3) that is gone be replaced!
    ...
  19. Antworten
    7
    Hits
    2.752

    Tunze streamers are controlled between 3-8v, at...

    Tunze streamers are controlled between 3-8v, at streamer 1-10v settings you can change each to 3v-8v. If you run the steamers on Y splitters its best to dedicated all (4) to one group at permanent...
  20. Antworten
    6
    Hits
    2.662

    where is this firmware to be found in download...

    where is this firmware to be found in download section as link gives 404 error
  21. Antworten
    6
    Hits
    2.662

    does this mean that GCC 1.0.8.2 became defined...

    does this mean that GCC 1.0.8.2 became defined (off Beta)? and ready as GHL recommended upload ?
  22. Antworten
    2
    Hits
    3.247

    if you restore the backup to PL it should...

    if you restore the backup to PL it should reconnect, however only if you made no changes to mitras. If you did update mitras than you need to program your channels and frequency manually via the...
  23. Antworten
    20
    Hits
    5.999

    Gents, I have had this freezing several times on...

    Gents, I have had this freezing several times on my mitras units... however after trying to find out why, I came to the conclusion its related to the used wireless communication channel. If you have...
  24. Antworten
    14
    Hits
    5.222

    this has been adres for some time now... ...

    this has been adres for some time now...

    http://forum.aquariumcomputer.com/showthread.php?9760-controlling-the-royal-ex-Rd3-speedy-pump-8m3-with-the-interface-adapter

    GHL should upgrade its DC...
  25. Antworten
    4
    Hits
    2.047

    I did that as the profilux but no change .. ..

    I did that as the profilux but no change .. ..
Zeige Ergebnis 1 bis 25 von 167
Seite 1 von 7 1 2 3 4