Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden; generiert vor 42 Minute(n).

  1. Antworten
    3
    Hits
    191

    Hello, This is a PC-specific issue, not...

    Hello,

    This is a PC-specific issue, not related to GCC.
    Please try running GCC on a different PC.
  2. Antworten
    1
    Hits
    77

    Hello Miahi, Please create a support ticket so...

    Hello Miahi,

    Please create a support ticket so we can help you with this.
  3. Thema: Kh add on

    von Vinny
    Antworten
    1
    Hits
    54

    Hi, The KHD will make adjustments to each...

    Hi,

    The KHD will make adjustments to each scheduled dose after a KH test, if the resulting value is too low or too high. It is set this way because it allows for a much more steady increase or...
  4. Thema: Level sensor

    von Vinny
    Antworten
    1
    Hits
    32

    Hi there, We have a step-by-step guide on how...

    Hi there,

    We have a step-by-step guide on how to do this on page 63 of the ProfiLux 4 Resource Guide:
    https://www.aquariumcomputer.com/downloads/profilux-4-resource-guide/

    Following these...
  5. Antworten
    1
    Hits
    42

    See this thread:...

    See this thread:
    https://forum.aquariumcomputer.com/showthread.php?12462-Mail-provider-settings-setup-for-mail-sending-with-ProfiLux-4
  6. Antworten
    3
    Hits
    139

    Happy to help. :)

    Happy to help. :)
  7. Antworten
    3
    Hits
    139

    Hi, If you do not want to use the TIMER to...

    Hi,

    If you do not want to use the TIMER to activate the water change, you can skip that part in the how-to video.
    After you have assigned the drain and fill functions to the desired powerbar...
  8. Antworten
    4
    Hits
    133

    We've reported this to our app dev team. They...

    We've reported this to our app dev team.
    They will look into this.
  9. Antworten
    3
    Hits
    191

    Hi, I'm not sure what you mean by "it gets...

    Hi,

    I'm not sure what you mean by "it gets stuck"...can you provide us with more information and a screenshot?
  10. If this is still an issue, please create a...

    If this is still an issue, please create a support ticket for further assistance.
  11. Antworten
    4
    Hits
    133

    Hi, So the maintenance mode does run for the...

    Hi,

    So the maintenance mode does run for the full 120 minutes, no?

    Is the issue more that the displayed remaining time is not correct?
  12. Antworten
    1
    Hits
    86

    Since this is a native standalone doser, it can...

    Since this is a native standalone doser, it can only be loaded with the firmware of a Standalone Doser.
    If need be, set the doser back to SA mode, then do the update.

    After the update, revert...
  13. Antworten
    6
    Hits
    108

    There was no need to restart the ProfiLux because...

    There was no need to restart the ProfiLux because you are doing an emergency update only on the Powerbar.
    If you clicked the EXTRAS tab at the top of the GCC screen, there will be 2 options that say...
  14. Yes. With Gate 6, you are combing the commands...

    Yes.
    With Gate 6, you are combing the commands from PL4 and PL5. Since PL4 includes a function from PL3 (Skimmer delay), this is included also.
  15. Antworten
    6
    Hits
    108

    1. Connect to your ProfiLux via USB 2....

    1. Connect to your ProfiLux via USB
    2. Disconnect ALL PAB devices, except the Powerbar-6E
    3. Make sure the powerbar is powered ON
    4. Click the Extras tab and select Firmware update in the PAB...
  16. Antworten
    7
    Hits
    106

    If you already downloaded the ESP update tool,...

    If you already downloaded the ESP update tool, you would need to go into that folder to open the tool.
  17. Antworten
    7
    Hits
    106

    Ok. Please follow the alternate steps for...

    Ok.

    Please follow the alternate steps for updating the WiFi module:

    https://www.youtube.com/watch?v=6z_7fhzJL-Q
  18. Antworten
    2
    Hits
    72

    You can use the same power supply but with 220v...

    You can use the same power supply but with 220v connector.
  19. Antworten
    3
    Hits
    116

    No problem. :) Yes you can definitely have the...

    No problem. :)

    Yes you can definitely have the KHD control a pump that is dosing alkalinity supplement.
    You would first need to setup a dosing schedule for that pump head. Afterwards, give the...
  20. Antworten
    7
    Hits
    106

    Have you tried restarting the app and power...

    Have you tried restarting the app and power cycling the P4?
  21. Yes, that looks fine to me. PL #6 is what you...

    Yes, that looks fine to me.

    PL #6 is what you would assign to the skimmer socket.
    That single gate now combines the maintenance delay AND the command you created in PL gate 4.
  22. Antworten
    7
    Hits
    106

    The WiFi module firmware is no longer located...

    The WiFi module firmware is no longer located within the GCC directory, it is now a separate download.
    We have an updated video which show you how to do the update:
    ...
  23. Antworten
    3
    Hits
    116

    First step would be to determine your average KH...

    First step would be to determine your average KH needs through normal dosing schedule step. The KHD would not be involved yet.
    Once you have found the neccessary dosage to maintain KH within a...
  24. We have a video which shows you how to setup the...

    We have a video which shows you how to setup the KHD for KH control...is this what you mean?

    https://www.youtube.com/watch?v=euXBpc0YILs
  25. We have this section explained in our P4 Resource...

    We have this section explained in our P4 Resource Guide, page 110.
    Check it out if you want to see it with pictures of the steps.

    How to create a socket delay after maintenance mode ends
    ...
Zeige Ergebnis 1 bis 25 von 499
Seite 1 von 20 1 2 3 4