Suchen:

Art: Beiträge; Benutzer: Himat

Seite 1 von 5 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden.

  1. Antworten
    1
    Hits
    964

    6d plug bar spares

    Hi,
    is it possible to get replacement pcp boards for the 6d plug bar
    mine are now 8+ years old, i have a problem with one that stays on,i have change the all relays to clear any sticky relays
    but...
  2. Thema: firmware 6.35

    von Himat
    Antworten
    3
    Hits
    4.892

    hi web interface now works still have issue...

    hi
    web interface now works
    still have issue with GHL control centre unable to save measurement data or display previous stored measurement data
    pop up box encountered improper argument.
  3. Thema: firmware 6.35

    von Himat
    Antworten
    3
    Hits
    4.892

    firmware 6.35

    hi
    firmware 6.35
    P3ex
    having issue with webinterface no data for sensors setting page

    and GHL control centre unable to save measurement data or display previous stored measurement data ...
  4. Antworten
    8
    Hits
    2.281

    all sorted now unused pumps needed to be...

    all sorted now

    unused pumps needed to be filled

    Thank you
  5. Antworten
    8
    Hits
    2.281

    Checked all level on containers All in the...

    Checked all level on containers
    All in the green not being empty
    Still these same blue /yellow light pluse
  6. Antworten
    8
    Hits
    2.281

    Ok yellow for warning Where do I need to look...

    Ok yellow for warning
    Where do I need to look in mybsetup for this
    As I said its indicated on both dosers
  7. Antworten
    8
    Hits
    2.281

    HI doser added to p3ex ok please explain the...

    HI
    doser added to p3ex ok
    please explain the lights
    on both doser 2.1 and 2 pulse blue and pulse yellow
    tried to look for an alarm conditions or level warnings
  8. Antworten
    8
    Hits
    2.281

    addtition of dosers to P3eX

    need some quidance on connecting dosers to p3 eX
    At present running ok
    P3ex with doser gen1 and standalone doser 2,and doser 2.1

    1, how do i go about connecting the stand alone dosers 2 and ...
  9. Antworten
    5
    Hits
    1.815

    ok thats normal then

    ok thats normal then
  10. Antworten
    5
    Hits
    1.815

    yes they do

    yes they do
  11. Antworten
    5
    Hits
    1.815

    any advise

    any advise
  12. Antworten
    5
    Hits
    1.815

    Doser 2 pump display in myghl

    Hi
    i have noticed that i am not display all four Pumps in myGHL
    in dashboard only three pumps displayed all three are dosing above 1ml
    but pump 3 which i have set to dose at 0.1ml dose not...
  13. Antworten
    10
    Hits
    3.277

    Hi As posted earlier have it working at -240...

    Hi

    As posted earlier have it working at -240 with 10mv hys and working fine between -230 and -250 have not updated firmware as of yet need to do,
    not calibrated probe in a while but only...
  14. Antworten
    10
    Hits
    3.277

    yes this doses work but if i go into the main...

    yes this doses work but if i go into the main control program it reverts to 0mv must be sum bug in the program will try upgading to new version and see what happens
  15. Antworten
    10
    Hits
    3.277

    REDOX PROBE setting for Nitrate reactor

    hi
    Need some help to set the redox probe to -190mv and 10mv hys . for nitrate reactor and using plug socket to control feed pump and nitrate fluid

    I have set the nominal value to -190mv and...
  16. Antworten
    7
    Hits
    2.305

    I have figured that the manual dose dosed not...

    I have figured that the manual dose dosed not dose in 0.1ml incremnts
    pumps dose 0.1ml in timed settings

    also noted that manual dose dose not dose the correct dose (pumps calibrated and tested...
  17. Antworten
    7
    Hits
    2.305

    just tried the above on setting 1 same result...

    just tried the above on setting 1 same result will dose 1ml ok but not 0.1 etc
  18. Antworten
    7
    Hits
    2.305

    hi I have tried the above and i have gone to...

    hi
    I have tried the above and i have gone to default setting and set the pump calibration all is ok pump spins very slow flow rate set at 5.5
    as i have said when i ask to dose 0.1ml ect manual...
  19. Antworten
    7
    Hits
    2.305

    All the above done, I am using silicon 1.5mm...

    All the above done,
    I am using silicon 1.5mm bore tubing
    If ai try manual dose to dose 0.5ml it does not dose, if maul dose 2ml ok

    question how do i dose small amout e.g. 0.3ml
  20. Antworten
    7
    Hits
    2.305

    DOSER 2 smallest dose possible

    hi

    what is the smallest dose possible on doser 2
    have the latest firmware/software installed

    I have calibrated the pumps on 0 setting and tried to dose 1.5ml and it only doses 1ml

    in...
  21. Thema: my ghl.com

    von Himat
    Antworten
    4
    Hits
    2.041

    ok that seems to work now. seem a little slow...

    ok that seems to work now.

    seem a little slow to load info

    thanks
  22. Thema: my ghl.com

    von Himat
    Antworten
    4
    Hits
    2.041

    reset cookes and cache reset safari still the...

    reset cookes and cache reset safari still the same

    as screnn shoots7680
    7681
    7682
  23. Thema: my ghl.com

    von Himat
    Antworten
    4
    Hits
    2.041

    my ghl.com

    HI

    I have updated firmware on doser2 and control centre to latest update.
    I had problems connecting to myghl.com now i get message all pumps inactive.so my doser is seen but not read the doser...
  24. Thema: Myghl

    von Himat
    Antworten
    2
    Hits
    1.082

    ok seems to work now

    ok seems to work now
  25. Thema: Myghl

    von Himat
    Antworten
    2
    Hits
    1.082

    Myghl

    i have updated to new firmware 1.07 for doser 2,
    have only managed to get gonected to the cloud via firefox ,
    safari and google crome shows doser unit but say not connected,
    in fire fox it seems...
Zeige Ergebnis 1 bis 25 von 114
Seite 1 von 5 1 2 3 4