Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden; generiert vor 46 Minute(n).

  1. Antworten
    3
    Hits
    135

    You're welcome! :)

    You're welcome! :)
  2. Antworten
    3
    Hits
    135

    Each head has a pair of clips that hold it onto...

    Each head has a pair of clips that hold it onto the body of the doser. Pinch these clips and pull away from the body. Take the new head and insert it onto the doser until you hear a "click" sound.
  3. Antworten
    1
    Hits
    139

    Please create a support ticket.

    Please create a support ticket.
  4. Antworten
    7
    Hits
    265

    Steps for creating a virtual probe can be found...

    Steps for creating a virtual probe can be found here:
    https://www.aquariumcomputer.com/knowledge-base/how-to-add-a-virtual-probe/
  5. Antworten
    3
    Hits
    249

    If the air size remains the same, no. The...

    If the air size remains the same, no.

    The difference may also be caused by the difference between the amount of ml in the sample tube vs. what was entered into the sample tube volume field. Verify...
  6. Antworten
    2
    Hits
    148

    Create a ticket for this please.

    Create a ticket for this please.
  7. Antworten
    7
    Hits
    265

    Yes, it is possible. The steps are explained...

    Yes, it is possible.

    The steps are explained here:
    https://www.aquariumcomputer.com/knowledge-base/how-to-stop-dosing-when-ph-is-above-x/
  8. Thema: Main PH probe

    von Vinny
    Antworten
    2
    Hits
    136

    Main pH probe should be connected to the P3. KHD...

    Main pH probe should be connected to the P3.
    KHD probe must be connected to the KHD probe port.

    There is no relation to tank pH changing during a KH test.
  9. Thema: YL2 Cables

    von Vinny
    Antworten
    3
    Hits
    274

    1m is the shortest. Roll the excess cable and...

    1m is the shortest.

    Roll the excess cable and use some zip ties so it cleans up the wiring.
  10. Antworten
    16
    Hits
    1.561

    Open a support ticket for further assistance.

    Open a support ticket for further assistance.
  11. Thema: mitras lx6100hv

    von Vinny
    Antworten
    2
    Hits
    205

    Hello, Please create a support ticket so we...

    Hello,

    Please create a support ticket so we can provide direct assistance.
  12. Antworten
    3
    Hits
    987

    Yes, that feature is planned.

    Yes, that feature is planned.
  13. Antworten
    2
    Hits
    221

    Both modes will be similar when only two pumps...

    Both modes will be similar when only two pumps are used. These differences between these options are more apparent when 3 or more pumps are involved. If you need the two pumps to alternate with each...
  14. Antworten
    3
    Hits
    239

    Hi Erik, Yes it's possible. You can use a...

    Hi Erik,

    Yes it's possible.

    You can use a float or optical sensor as your "Leak detector" when you create a Leakage detection function....
  15. Thema: Tunnel 6105 x 6

    von Vinny
    Antworten
    3
    Hits
    194

    Those ports were never intended to have more than...

    Those ports were never intended to have more than 2 devices connected to them. If you need more L-channels, you can get 1 more port (2 additional channels) with the PLM-2L4S card or 2 more ports (4...
  16. Thema: Tunnel 6105 x 6

    von Vinny
    Antworten
    3
    Hits
    194

    Hi there, Each L-port is intended to run 2...

    Hi there,

    Each L-port is intended to run 2 independent channels. It looks like you're trying to connect 3 pumps to a single port which is incorrect.

    Each port should have a YL2-splitter...
  17. Antworten
    4
    Hits
    406

    Apologies for the delay. The assigned support...

    Apologies for the delay. The assigned support member has been pinged.
  18. Antworten
    2
    Hits
    233

    Hi Ronald, This article shows you how to...

    Hi Ronald,

    This article shows you how to include descriptions for each powerbar socket in your email notification:...
  19. Antworten
    2
    Hits
    252

    Scott, Perhaps the cable from the display has...

    Scott,

    Perhaps the cable from the display has come loose. Check this first.

    If the problem continues, please open a support ticket.
  20. The option will be directly below your pump...

    The option will be directly below your pump information as shown in the how-to article:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-vortech-pump-control/

    The missing section for...
  21. In the vortech page's Feed pause, press the blue...

    In the vortech page's Feed pause, press the blue gear icon. You have to choose "OFF" so it tells the pump to turn OFF. Press Apply, then scroll down that vortech page and specify the FP that this...
  22. Once you have told the Vortech which FP it should...

    Once you have told the Vortech which FP it should react to, setup your FP function by following these steps:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-feed-pauses-with-profilux/
    ...
  23. Thema: replace ph probe

    von Vinny
    Antworten
    1
    Hits
    202

    No. The probe used by the KHD is specially...

    No.

    The probe used by the KHD is specially designed for the KHD.
  24. A few cm of liquid at the end of the waste water...

    A few cm of liquid at the end of the waste water tube is OK. Anything more than that and the pump head should be recalibrated, preferably using a digital scale for best accuracy.
  25. Antworten
    4
    Hits
    695

    Hello Gary, You can connect to and control the...

    Hello Gary,

    You can connect to and control the doser using the GHL Connect app. This video shows you how to do that:
    ...
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4