Thank you all I have it working ( i think) I went to pro logic and tried several times. Then read some more and found that in the pull down list filter means feed pause. and G1 is pro-logic 1 etc...
Type: Posts; User: AndreO
Thank you all I have it working ( i think) I went to pro logic and tried several times. Then read some more and found that in the pull down list filter means feed pause. and G1 is pro-logic 1 etc...
I have skimmer on switch 5 as a filter but I have to choose 1 to 4 Then in feed pause I checked all four boxes but it only turns off when I use feed pause 4 .After testing a found that if I change...
I thought that there is a way to use the optical sensor on the outside of tank yes or no . If so how do you set it up Thanks AndreO
I have tried over the years to assign 5 mp10 pumps. I can get 4 recognized but the next pump doesn’t show up on the pump list but does respond as if it is a number one pump. So any time the number...
update to above the over view still says error 3 but the pump is working as it should seems that when it was to go into its next time change ( lagoon calm mode it did and the led is back to purple)
The time changed this weekend and one of my 5 pumps now show error 3. so I reset them all numerous times but that pump still has error 3 and the center LED is green all the others are still running...
where do i find these updated firmware files..AndreO
you can not see me but I am doing the Happy dance
I have a doser 1 ( blue original) set up in my system as sockets 1-4 can I then add a dosser 2 to the PAB line and will they both show up in doser overview so they can be set up.
when in doubt read the manual there is lots of info in the ecotech pump manual. But there is not a QD manual and the pump did not come with one ( only has quick start guide)
I have since up dated the controller and now it tells me that I have unknown pumps but it did see the one older ecotech pump. I also tried to get firmware info from Ecotech but what they want is one...
I have sent all the info as requested I as i said in other post this is only since adding the QD drivers....AndreO
I think that once the vortech controller is fixed then the profilux will see the pumps and they will show on the Touch
Ecotech has a new line of return pumps that are controlled using a QD controller. do you know if they are compatible with your controller
I use the second port for my touch display screen. Every pab device has two ports so that you can keep adding devises such as another pab power bar as these are daisy chained but can never be...
I have it working now this is how to configure it..... have controller set you first pump to master and all others set according how you have them positioned around the tank and assign the using the...
I have read you posts again and is it your pump that is not wireless. In order for the controller to work with the pumps they have to be wireless enabled. This means when they power up the W in the...
that is so you add more Pab devises. I have 5 vortech pumps running on my controller just follow the instructions to the T. Think off it that the controller tells the pumps what to do. But I...
I have done some testing so I hope this helps . it is only the pumps thst have the new QD driver that have the problem. when I install the old driver back to the pump the controller sees the pump...
I have now updated the touch and still only shows pump 1 at 80 and pump3 at 40 and I added one more pump to tank so now have 5 running and they are doing the Tidall swell mode as per ecotech and are...
thank you it is done
Well I have now updated the controller and the touch. The touch no difference still only shows pumps 1 and 3 plus the info for them is wrong it is still stuck at 40 and 80. The vortech controller...
well I got out my back up mp 10 and connected it to vortec controller and it sees it as an MP10 eco w and displays firmware. but my new mp10 qds (4 of them still show up as mp 40 www.and nothing else...
Firmware 1.05 all 4 of my pumps are programmed the same way they are set up to do tidal swell mode and that is what they are doing but the touch says 1 is 80% and 3 is 40% all day long the other...
any one some help please