Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Antworten
    4
    Hits
    57

    How are you connecting to the device? USB or...

    How are you connecting to the device?
    USB or Network?

    If USB, check the connection settings and set the COM port to the number that is shown in your windows device manager.
    Open device manager,...
  2. Antworten
    8
    Hits
    65

    Have you tried using another USB cable, another...

    Have you tried using another USB cable, another PC, or USB port?

    Firmware v1.00 can connect with GCC without a problem. The issue may be related to the cable being used, the USB port on the PC, or...
  3. Antworten
    2
    Hits
    72

    Hello Miloš, If they are still 1-10V...

    Hello Miloš,

    If they are still 1-10V compatible, the answer is yes.
    You may however need additional parts from the pump manufacturer to enable 3rd party control.

    From GHL, you will need the S...
  4. Antworten
    8
    Hits
    65

    Hi, First download the most recent version of...

    Hi,

    First download the most recent version of GCC. That will give you access to the most recent firmware version of the LX7....
  5. Antworten
    6
    Hits
    72

    Hi, The motors would be run independently from...

    Hi,

    The motors would be run independently from each other so there is no problem there.

    If you only need to feed 200ml to the NO3 reactor over the day and feed 4-5L, the motors are suitable for...
  6. Antworten
    3
    Hits
    40

    Hi, The differences between Add-on mode and...

    Hi,

    The differences between Add-on mode and Adaptive mode are explained on page 36 of the KHD manual.
    What you choose is based on personal preference.

    Index: Dosing pump number that will be...
  7. Antworten
    8
    Hits
    216

    Yes, you got it! Both begin on the same day, but...

    Yes, you got it!
    Both begin on the same day, but their first dose of the day can be set to begin apart from each other.
  8. As long as the "starting" times for each dosing...

    As long as the "starting" times for each dosing pump is not identical, the dosing times will not overlap.

    I like to keep my Ca and KH times 30 minutes apart.
  9. Yes, that is correct.

    Yes, that is correct.
  10. Antworten
    8
    Hits
    216

    @tonvol You can use the Auto dosing option and...

    @tonvol
    You can use the Auto dosing option and select at what time you what the first dose of the day to occur for the selected pump. On the 2nd pump, set the starting dose far enough so that the...
  11. Antworten
    2
    Hits
    58

    Yes, it will work. Just make sure the D2.0 is...

    Yes, it will work.
    Just make sure the D2.0 is running on the latest firmware. :)
  12. Hello, If this is still an issue please create...

    Hello,

    If this is still an issue please create a support ticket for further assistance.
  13. Antworten
    1
    Hits
    199

    Thank you for bringing this to our attention.

    Thank you for bringing this to our attention.
  14. Thema: Mounting LX7

    von Vinny
    Antworten
    2
    Hits
    154

    This may not be exactly what you're referring to,...

    This may not be exactly what you're referring to, but it is possible to mount them to 80/20 aluminum pieces.
    In this tank setup, the LX7 themselves were held by fabricated mounts.
    11680
  15. Antworten
    2
    Hits
    56

    Hi, The stirrer will work with a container...

    Hi,
    The stirrer will work with a container thickness of 1 cm.
  16. Antworten
    2
    Hits
    160

    Hello, The most efficient way to do AWC is to...

    Hello,

    The most efficient way to do AWC is to use 2 sensors in your sump where 1 is the minimum and 1 is the max (standard water level).
    Once you have both sensors, you can create a WC schedule...
  17. Antworten
    1
    Hits
    82

    Yes the probes will be fine in this kind of...

    Yes the probes will be fine in this kind of environment.
  18. Hello Son, Please open a support ticket so we...

    Hello Son,

    Please open a support ticket so we can assist further.
  19. Antworten
    1
    Hits
    131

    Hi, No this would not be doable due to the...

    Hi,

    No this would not be doable due to the large differences in hardware.
  20. Antworten
    10
    Hits
    852

    Hello, Please email support@ghl-kl.de

    Hello,

    Please email support@ghl-kl.de
  21. Antworten
    4
    Hits
    163

    Is the green light on the P4 turned ON? Please...

    Is the green light on the P4 turned ON?

    Please post a screenshot of what you are seeing.
  22. Here's a video which shows you how it's done: ...

    Here's a video which shows you how it's done:

    https://www.youtube.com/watch?v=IxUfJJrcTXM&list=PLIc-M-kW4fVnlc5RbVAeNOkcebAh-iCL8&index=7&t=0s
  23. Antworten
    3
    Hits
    110

    If all the P4 expansion card slots are used up,...

    If all the P4 expansion card slots are used up, yes.
  24. Antworten
    1
    Hits
    113

    Hi, This is our next upcoming feature which is...

    Hi,

    This is our next upcoming feature which is nearing final testing.

    If you wish to try the GHL Connect app which includes this feature, you can find it here:...
  25. Antworten
    1
    Hits
    185

    Hi, All ProfiLux firmware are included when...

    Hi,

    All ProfiLux firmware are included when you download the most recent version of GHL Control Center:
    https://www.aquariumcomputer.com/downloads/ghl-control-center-v1-1-2-5/

    Here is a how-to...
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4