Flow Sensors ONLY work on 1 and 2 level port and I think 5 and 6.
If you have an eX you can move one of your level sensors to 3 and put the flow sensor on 1
Type: Posts; User: Antipodes
Flow Sensors ONLY work on 1 and 2 level port and I think 5 and 6.
If you have an eX you can move one of your level sensors to 3 and put the flow sensor on 1
If your main pump as setup as filter 1 then
Select Programmable logic 1
Select Timer 4 (Tick inverted) This will mean it will be on when the timer is not selected)
Select Filter 1
Select AND (So...
You can't just select a socket! You need to select the item that is connected to that socket. Eg Stream pump 9 or Filter 1 or another programmable logic!
This earlier thread had an example.
But no one seemed to want to supply code.
Myself, I don't have the spare time for this and just use the standard served pages.
The latest version of Control Centre (1073) has firmware 6.18 built into it.
I have not updated to this but updated to 6.15 when I uploaded that version of Control Centre.
Don't know why they do...
Got to the systems page.
7677
Go to LAN button and click.
7678
Enter the NTP (Timeserver for your location) (Google or bing search)
Enter your timezone and update interval.
This will keep your...
This Tab is just a location that allows you to publish your own web site and info on the profilux.
With the changed GHL webserver and upgrades over recent years the My site tab is a bit defunct....
Yeah Ok. That is a bit more readable than the info I found last night.
So to find cell constant you just need to have a feeler gauge, and a vernier caliper.
Not really sure why you would want this...
Interesting, I found some info on calculating the constant however it is a little beyond my current knowledge.
Also not really in my to do list at the moment.
GHL will have to answer this one!
Sorry, I am not sure what you are asking here?
The platinum probes are used as they are more resilent to sea water and organic contamination. (But they still can get organic growth on them, so...
I believe this is the default if the profilux does not recognise if a probe is installed.
The socket on the ps2 plug is very problematic and on some is quite loose. This has caused issue with some...
I have looked at this and don't see away to do this.
The system is designed to reset it self once the problem disappears.
They base the system on auto top up.
Even with a digital card with a...
As Gunther has said, if you want to check a calibration fluid for an electrical probe you will need to use a electrical probe to read it accurately.
What you can do is read it with probe....
That site looks like it is more than just the profilux user html page.
There is not enough free memory to do that.
I think that the person who has set that up is using a website and is pulling the...
As do I, but I do my best not to contaminate buffer solutions by cleaning the probe in RO water after using it in one buffer and air blowing it to get most of the moisture of it before putting it in...
Actually 19mm is 3/4" (20mm plumbing fittings) so you need to go that size at least.
2.5 mm is 1/2" (which is normally 15mm in the plumbing fittings.)
Yeah, mine did the same.
I have an exchange server and had to remove my password and authentication from the profilux and it seemed to work. (Very backward and not secure I know) But as it is on...
So they are GHL sensors and wired correctly?
Maybe your mechanical sensor is broken.
The optical sensor uses 3 wires and the mechanical only 2, so very unlikely that the card is broken as you have tested it works with the optical sensor!
In your picture you can see the extras tab which you have open at the moment on the top of the window.
You can also see an option to do a hardware upgrade to the extended version.
IF you are sure...
Cool, good to hear reef!
Correct, first alarm is immediate!
Not sure on different alarm type. Have not tested this as I don't have too many issues and am now pretty much in the city full time now.
But if you have time try...
I have my alarm email set to Cyclic and an interval set of 6 hours!
Only 1 email for a level alarm every 6 hours.
But I understand what you are saying. Everytime they work on something(like...
Carolin, if you note his first post, he wants to turn off a return pump, skimmer and other items.
Which is what a lot of others including myself would expect from this sort of unit!
He has asked...
If you mean like put it on the profilux port 1& 2 and use port 1 for the flow sensor and port 2 for a float switch. Yes this will work.