Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden.

  1. Antworten
    3
    Hits
    20

    PAR at the bottom will depend on the layout of...

    PAR at the bottom will depend on the layout of the rock, placement of coral, depth of sand, and distance of fixture from the water surface.
    It also depends on the type of coral which will be at the...
  2. Antworten
    3
    Hits
    20

    Hello Miloš, If you position the Mitras...

    Hello Miloš,

    If you position the Mitras perpendicular to the length of the tank, 3x LX7206 fixtures will be enough for a mixed reef.
    If you plan to have mostly SPS, we recommend using 4 fixtures....
  3. Antworten
    1
    Hits
    76

    Welcome to the GHL community! Happy to have you...

    Welcome to the GHL community!
    Happy to have you here.

    Feel free to ask us any questions you have. :D
  4. Antworten
    4
    Hits
    91

    Since the existing web interface FW is quite...

    Since the existing web interface FW is quite outdated, you can do the update by using the same tool. This time, select "Reprogram Filesystem".
    That will update the web interface.

    Please note, you...
  5. Antworten
    5
    Hits
    121

    One way to do this is using Programmable Logic:...

    One way to do this is using Programmable Logic:
    1. Choose desired pump channel and set it to react to a switch channel that not being used.
    2. Go to the PL settings page, select an unused Gate, set...
  6. For more tips on achieving best accuracy, take a...

    For more tips on achieving best accuracy, take a look at our FAQ post:
    https://www.aquariumcomputer.com/support/faqs/#1544275617719-e411fbea-c9e7
  7. Hi, Don't overthink it. :) Tiny variances...

    Hi,

    Don't overthink it. :)

    Tiny variances of 1mm in tube diameter and tiny bits of trapped air in the filter are already taken into account with each test. Just add the total length of the...
  8. Hi, The pumps running the KHD should be set to...

    Hi,

    The pumps running the KHD should be set to the required speeds mentioned in the manual.
    If pump noise and excess wear continues to be an issue, please open a support ticket for further...
  9. Antworten
    2
    Hits
    87

    Hello, The 1-10v is not designed to be used as...

    Hello,

    The 1-10v is not designed to be used as a sole power source for other devices.
    I am not familiar with the Tunze osmolator pump. It would be best to contact Tunze and see if it is possible...
  10. Antworten
    3
    Hits
    176

    You can have 100m distances between PAB devices....

    You can have 100m distances between PAB devices. If you can run a PAB cable from the P4 to the basement, it is possible to make it work with a 2nd powerbar placed in the basement.
  11. Antworten
    2
    Hits
    107

    Hello Faizal, The combination will depend on...

    Hello Faizal,

    The combination will depend on what overall color you'd like to have for your aquarium.
    If you prefer the bluer spectrum, I would do 1x Deep Actinic and 1x Actinic.
    If you prefer...
  12. Antworten
    5
    Hits
    121

    Yes, it is doable. How it is done depends on...

    Yes, it is doable.
    How it is done depends on what kind of dosing pump you are using.

    If using a standard ON/OFF dosing pump, it must be connected to an available Powerbar socket. That socket must...
  13. Antworten
    3
    Hits
    170

    The sensor data will be stored on the cloud and...

    The sensor data will be stored on the cloud and can be accessed at anytime using your phone, tablet, or web browser. Each sensor can be viewed separately and within user-defined time-periods. If you...
  14. Antworten
    3
    Hits
    176

    The 1-10V channels are not designed to be used as...

    The 1-10V channels are not designed to be used as an actual power source that a solenoid requires. If you wish you use a solenoid, it is possible when you connect it to a powerbar socket.
  15. Thema: ORP reading

    von Vinny
    Antworten
    3
    Hits
    218

    The ProfiLux 3 already has built-in redox control.

    The ProfiLux 3 already has built-in redox control.
  16. Antworten
    4
    Hits
    281

    If the "Current IP" did not auto-fill, that means...

    If the "Current IP" did not auto-fill, that means something was entered incorrectly in the WiFi setup steps.
    Check the SSID (Your WiFi network name) and Password (Your WiFi password). These areas...
  17. Antworten
    1
    Hits
    115

    This feature has been available for a while now....

    This feature has been available for a while now.
    Please update your doser to begin using the measurement logging feature.
  18. Antworten
    3
    Hits
    103

    In the dosing pump settings, you can specify at...

    In the dosing pump settings, you can specify at what time the first dose shall take place. Based on this option you can then stagger each dosage so they do not happen at the same time.
  19. Thema: ORP reading

    von Vinny
    Antworten
    3
    Hits
    218

    Hi there, The range for the Redox probe is...

    Hi there,

    The range for the Redox probe is -300 to +600mV.
    This is mentioned on page 43 of the ProfiLux 4 Programming Guide.

    Yes, you can have the doser run based on a specified mV range.
  20. Hello, Running the cooling and heating devices...

    Hello,

    Running the cooling and heating devices at the same time would be inefficient since they would counteract each other.
    If the concern is the possibility of frequent ON/OFF switching, we...
  21. Hello, We have not had any recent reports on...

    Hello,

    We have not had any recent reports on issues with the ticket system. Please try with another browser and login using the GUEST login.
  22. Antworten
    4
    Hits
    281

    Hello Khanh, Regarding the control panel, have...

    Hello Khanh,

    Regarding the control panel, have you tried calibrating the touch keys?
    If not, we have a video here:

    https://www.youtube.com/watch?v=_TcYw3qkCaw

    Regarding WiFi connection over...
  23. Antworten
    5
    Hits
    1.376

    No, because it does not seem to have any 1-10v...

    No, because it does not seem to have any 1-10v input connector on the driver.
  24. Antworten
    3
    Hits
    414

    Please open a ticket for further assistance.

    Please open a ticket for further assistance.
  25. Antworten
    3
    Hits
    301

    More details please...

    More details please...
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4