Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden.

  1. Antworten
    3
    Hits
    98

    Are you referring to the logbook entries or the...

    Are you referring to the logbook entries or the charts?
  2. Regarding the second question, if you're planning...

    Regarding the second question, if you're planning to mount the optical sensor to your own rod just give the sensor about 0.5 inch space between the tip and the side-wall.
  3. Antworten
    2
    Hits
    97

    Have you tested the fan controller to see if it...

    Have you tested the fan controller to see if it turns the fans ON when needed?
    You can check this by adjusting the nominal value of your temperature probe and saving settings.
  4. Hello Andre, The slower speeds would be more...

    Hello Andre,

    The slower speeds would be more suitable for extended run-times as it puts less wear on the moving parts.
  5. Antworten
    1
    Hits
    107

    The logo light can flash two colors...

    The logo light can flash two colors simultaneously.
    Blue: Connected
    Yellow: One or more dosing container fluid levels are running low.

    More information on color codes can be found on our FAQ...
  6. Antworten
    2
    Hits
    137

    15m would be the max recommended cable length....

    15m would be the max recommended cable length.
    Keep in mind the longer the cable becomes the more the reaction time increases.
  7. Hello Dan, According to the Geissmann website,...

    Hello Dan,

    According to the Geissmann website, this Hybrid has a space of 261mm x 1500mm for the LEDs and 500mm x 1506mm if you use their shortening set.
    I am not familiar with their light, so it...
  8. Antworten
    34
    Hits
    5.331

    @faltaren @brianmsu80 Have you created a...

    @faltaren
    @brianmsu80

    Have you created a support ticket so we can help you with this?
    If not, please do so.
  9. Antworten
    1
    Hits
    241

    Hello, Glad to hear it was sorted out. Can...

    Hello,

    Glad to hear it was sorted out.
    Can you please post a screenshot of what you're referring to when you say there is no SAVE button in GHL Connect?
    This button is always at the very bottom...
  10. Hello, Please open a support ticket so we can...

    Hello,

    Please open a support ticket so we can take a closer look at your settings.
  11. Antworten
    2
    Hits
    190

    The Doser Maxi is designed for transporting...

    The Doser Maxi is designed for transporting larger volumes of fluid. Although there are some users running their Maxi as a calcium reactor feed, we would not recommend it for non-stop usage as it may...
  12. That is perfectly OK to do. :)

    That is perfectly OK to do. :)
  13. KHD charting on a Standalone Doser was added when...

    KHD charting on a Standalone Doser was added when firmware 1.35 was released.
  14. Hi there, 1. Yes that is correct. The updates...

    Hi there,

    1. Yes that is correct. The updates are done using GHL Control Center. We have a video here which walks you through the entire process, including how to download the new version of GHL...
  15. Antworten
    3
    Hits
    147

    PAR at the bottom will depend on the layout of...

    PAR at the bottom will depend on the layout of the rock, placement of coral, depth of sand, and distance of fixture from the water surface.
    It also depends on the type of coral which will be at the...
  16. Antworten
    3
    Hits
    147

    Hello Miloš, If you position the Mitras...

    Hello Miloš,

    If you position the Mitras perpendicular to the length of the tank, 3x LX7206 fixtures will be enough for a mixed reef.
    If you plan to have mostly SPS, we recommend using 4 fixtures....
  17. Antworten
    1
    Hits
    163

    Welcome to the GHL community! Happy to have you...

    Welcome to the GHL community!
    Happy to have you here.

    Feel free to ask us any questions you have. :D
  18. Antworten
    4
    Hits
    164

    Since the existing web interface FW is quite...

    Since the existing web interface FW is quite outdated, you can do the update by using the same tool. This time, select "Reprogram Filesystem".
    That will update the web interface.

    Please note, you...
  19. Antworten
    5
    Hits
    213

    One way to do this is using Programmable Logic:...

    One way to do this is using Programmable Logic:
    1. Choose desired pump channel and set it to react to a switch channel that not being used.
    2. Go to the PL settings page, select an unused Gate, set...
  20. For more tips on achieving best accuracy, take a...

    For more tips on achieving best accuracy, take a look at our FAQ post:
    https://www.aquariumcomputer.com/support/faqs/#1544275617719-e411fbea-c9e7
  21. Hi, Don't overthink it. :) Tiny variances...

    Hi,

    Don't overthink it. :)

    Tiny variances of 1mm in tube diameter and tiny bits of trapped air in the filter are already taken into account with each test. Just add the total length of the...
  22. Hi, The pumps running the KHD should be set to...

    Hi,

    The pumps running the KHD should be set to the required speeds mentioned in the manual.
    If pump noise and excess wear continues to be an issue, please open a support ticket for further...
  23. Antworten
    2
    Hits
    223

    Hello, The 1-10v is not designed to be used as...

    Hello,

    The 1-10v is not designed to be used as a sole power source for other devices.
    I am not familiar with the Tunze osmolator pump. It would be best to contact Tunze and see if it is possible...
  24. Antworten
    3
    Hits
    283

    You can have 100m distances between PAB devices....

    You can have 100m distances between PAB devices. If you can run a PAB cable from the P4 to the basement, it is possible to make it work with a 2nd powerbar placed in the basement.
  25. Antworten
    2
    Hits
    341

    Hello Faizal, The combination will depend on...

    Hello Faizal,

    The combination will depend on what overall color you'd like to have for your aquarium.
    If you prefer the bluer spectrum, I would do 1x Deep Actinic and 1x Actinic.
    If you prefer...
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4