Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,04 Sekunden.

  1. Less than 1% of users have a need for a limit...

    Less than 1% of users have a need for a limit higher than 1000ml/min flow rate.
    If you'd like to make a feature request, you may submit it to: wish@ghl-kl.de
  2. Antworten
    2
    Hits
    93

    Hello, Are you saying the reagent tube is...

    Hello,

    Are you saying the reagent tube is detaching from the pump head when running the "vent internal reagent tube" function?
    If yes, then this can happen if the reagent tube was not fully...
  3. Antworten
    5
    Hits
    284

    Yes, the O-ring is included with every fitting. ...

    Yes, the O-ring is included with every fitting.

    If you already have an open ticket, please post there so we can help directly.
  4. Antworten
    18
    Hits
    934

    The probe should be stored in water if it won't...

    The probe should be stored in water if it won't be used for more than 2 days. Otherwise it has a chance of drying out completely if it sits inside an inactive KHD measurement cell.
  5. Antworten
    18
    Hits
    934

    The KHD must lay horizontally with the probe also...

    The KHD must lay horizontally with the probe also laying in the same way. The pH probe from the P4 is NOT the same kind used by the KHD and would therefore not be a suitable alternative.
  6. Thema: Powerbars?

    von Vinny
    Antworten
    3
    Hits
    318

    Instructions for setting up the STDL4-4 on a...

    Instructions for setting up the STDL4-4 on a ProfiLux can be found here:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-stdl4-4-powerbar-on-profilux/
  7. Antworten
    10
    Hits
    3.529

    Either option will give you plenty of light...

    Either option will give you plenty of light coverage. If you choose to focus more on SPS, 2x 7204 will provide more light output.
  8. Antworten
    18
    Hits
    934

    It is possible the probe has reached end of life...

    It is possible the probe has reached end of life and will need replacing. Being that this was a second hand unit, there's no telling how long it sat in the box before being put to use. This also...
  9. Antworten
    5
    Hits
    284

    Thank you for opening up a ticket. The team will...

    Thank you for opening up a ticket. The team will reply to you asap when they return.
  10. Antworten
    5
    Hits
    284

    KHD requires a 24V PSU, not 12V. The 24V PSU is...

    KHD requires a 24V PSU, not 12V. The 24V PSU is shared between the KHD and Doser.

    Use the original 24V PSU and connect it directly to the doser, then to the KHD. If the PSU powers the devices, the...
  11. Hey, I'm glad you got it working. Thank you...

    Hey,

    I'm glad you got it working. Thank you very much for updating the thread with your findings.
  12. Antworten
    18
    Hits
    934

    How old is the probe? If it's showing slower...

    How old is the probe?
    If it's showing slower reaction than what you remember seeing before, it's probably time to re-calibrate.
  13. Antworten
    18
    Hits
    934

    As per the filter manual, from sump to doser.

    As per the filter manual, from sump to doser.
  14. Antworten
    18
    Hits
    934

    Stock GHL tubing will fit over the GHL filter. It...

    Stock GHL tubing will fit over the GHL filter. It will fit very snug, but it will fit.
    Dipping the end of the tube in hot water will give it enough flex to connect the filter.

    You can press...
  15. Antworten
    18
    Hits
    934

    Those numbers look OK. Any reason why you are...

    Those numbers look OK.

    Any reason why you are not using the water sample filter?
    Without a filter installed, one cannot rule out the possibility of sediment getting into the sample which is...
  16. Antworten
    18
    Hits
    934

    What settings did you enter into the dosing...

    What settings did you enter into the dosing pumps?
    Speed? Flow rate?

    What number did you enter into the KHD water sample volume?
    Are you in front of the device during a measurement? Do the pumps...
  17. Antworten
    10
    Hits
    825

    You cannot mix LX7 clusters on an LX6. Different...

    You cannot mix LX7 clusters on an LX6. Different generation, different hardware design.
  18. Antworten
    10
    Hits
    825

    Hi Simon, It's great that you've had the LX6...

    Hi Simon,

    It's great that you've had the LX6 running for over a decade. :)
    Unfortunately, production of these clusters stopped quite a while ago.

    The only available upgrade path would be to...
  19. Antworten
    1
    Hits
    493

    Hi Nick, Since this Touch device is a...

    Hi Nick,

    Since this Touch device is a PAB-device, you would follow the emergency update steps specifically for PAB-devices. You will find instructions for that in the respective Knowledge Base...
  20. Thank you for the update. Glad it's working...

    Thank you for the update. Glad it's working normally for you again.
  21. If you revert to an older FW such as v6.45, does...

    If you revert to an older FW such as v6.45, does the expansion card become visible to the P3?
  22. Antworten
    4
    Hits
    367

    If the goal is to connect and access the doser...

    If the goal is to connect and access the doser via your Wi-Fi network, then you should connect via USB and enter your network info in the doser's wifi settings page. This will require you to enable...
  23. Antworten
    2
    Hits
    859

    Hi Nigel, That blue button at the bottom of...

    Hi Nigel,

    That blue button at the bottom of the switch channels page is only for the Powerbar-6D (not 6E) and first gen doser slave.
  24. Antworten
    1
    Hits
    214

    You can daisy chain two VTN-5 cables together....

    You can daisy chain two VTN-5 cables together. Just keep in-mind the longer the run, the longer the reaction time (ms) due to the extended length.
  25. Antworten
    11
    Hits
    840

    Have you opened a support ticket for this issue?

    Have you opened a support ticket for this issue?
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4