Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. For a single 0.1ml dose, you must run the pump at...

    For a single 0.1ml dose, you must run the pump at the slowest speed, (0).
    If you do not need to dose quantities that small, you can use speed (1), (2), (3).

    The smaller the single dose, the...
  2. Antworten
    1
    Hits
    62

    Hello, Celsius readings from the P Touch is...

    Hello,

    Celsius readings from the P Touch is the standard measurement value.
    We will add Fahrenheit to this in a future firmware release for the Touch display.
  3. Unassign the doser from the PAB system, then...

    Unassign the doser from the PAB system, then reassign and adjust pump speed for each head.
  4. Antworten
    3
    Hits
    76

    Thank you for bringing this to our attention. It...

    Thank you for bringing this to our attention.
    It is fixed now! :)
  5. Antworten
    5
    Hits
    138

    As Pit mentioned, the product itself will work...

    As Pit mentioned, the product itself will work with 110V or 220V.

    The US warehouse stocks power supplies with 110V power cables. The power supply itself is a wide-range PSU. If you wish to...
  6. Antworten
    5
    Hits
    138

    Hello Pablo, Thank you for your interest in...

    Hello Pablo,

    Thank you for your interest in our ProfiLux 4 controller.

    Yes, the P4 can most certainly control your calcium reactor based on the pH readings of the reactor chamber. To do this...
  7. Glad you got it working! :)

    Glad you got it working! :)
  8. Thema: Vectra M1

    von Vinny
    Antworten
    2
    Hits
    116

    Hi there, First make sure it is connected to...

    Hi there,

    First make sure it is connected to any socket S1-S4. Connecting to S5 on a PB5.1 is okay as long as the pump does not exceed the MAX 2A rating on this socket.

    Once the pump is...
  9. Please clear the browser cache.

    Please clear the browser cache.
  10. Hi, Corrosion on the pins will certainly cause...

    Hi,

    Corrosion on the pins will certainly cause communication issues. It would be best to just replace both Tunze cables and the YL2 splitter if that has corrosion spots also.
  11. Antworten
    2
    Hits
    144

    These and other features are on our to-do list. :)

    These and other features are on our to-do list. :)
  12. When you open the KHD housing, you will see the...

    When you open the KHD housing, you will see the white filter inside the vent tube.
    Unscrew the connector that holds the vent tube in-place, remove the tube then remove the filter. Reinsert the tube...
  13. Antworten
    2
    Hits
    63

    Hello Jack, A 2.5mS swing is equivalent to a...

    Hello Jack,

    A 2.5mS swing is equivalent to a 1.001 SG swing which is an unnoticeable change in a reef.
    Specific Gravity (SG) is the standard measurement used for reef tanks. Some use the PPT...
  14. Please also post a screenshot of your...

    Please also post a screenshot of your COMMUNICATIONS settings page.
  15. Antworten
    11
    Hits
    381

    Can you post a screenshot of your P4's signal...

    Can you post a screenshot of your P4's signal strength?
  16. Antworten
    17
    Hits
    573

    If you revert back one FW version, does the issue...

    If you revert back one FW version, does the issue persist?
  17. Antworten
    1
    Hits
    71

    Hello Nihard, This typically happens if the...

    Hello Nihard,

    This typically happens if the update process was interrupted before completion. Your P4 can be restored to working order by following the steps here:...
  18. Antworten
    1
    Hits
    191

    Hi there, We appreciate the feedback. We have...

    Hi there,

    We appreciate the feedback. We have run independent studies and tests on different combinations of LED configurations. The current combo provides the best balance of spectrum for color...
  19. Antworten
    4
    Hits
    147

    Yes, you can adjust each to 0.01

    Yes, you can adjust each to 0.01
  20. Antworten
    4
    Hits
    147

    P4 allows you to set what value fluids you are...

    P4 allows you to set what value fluids you are using during the calibration steps.
  21. Antworten
    29
    Hits
    851

    Okay. Support will be carried out in the ticket...

    Okay. Support will be carried out in the ticket system.
  22. Thema: KH Readings

    von Vinny
    Antworten
    7
    Hits
    444

    Just a heads up, the KHD will stop testing once...

    Just a heads up, the KHD will stop testing once there is 50ml or less reagent left in the bottle. You may want to have another bottle ready before you get to that point. ;)
  23. Antworten
    29
    Hits
    851

    Have the charts been reporting correct...

    Have the charts been reporting correct measurement times now?
  24. Antworten
    4
    Hits
    180

    Excellent! :D

    Excellent! :D
  25. Antworten
    1
    Hits
    102

    Hi there, Can you please use our newest...

    Hi there,

    Can you please use our newest version of GCC v1118 and let us know if the issue persists?

    https://www.aquariumcomputer.com/downloads/ghl-control-center-v1-1-1-8/
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4