Suchen:

Art: Beiträge; Benutzer: cerreta

Seite 1 von 2 1 2

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Antworten
    7
    Hits
    2.203

    No not working. I actually can not view the P3...

    No not working. I actually can not view the P3 from the Internet. I thought I could, because I was at teh office and it worked. So, I can view it within the network, but once I leave the local...
  2. Antworten
    7
    Hits
    2.203

    This was confusing, but I figured it out. In...

    This was confusing, but I figured it out.

    In the P3 System settings; webserver; I changed Administrator password to 123 and Guest password to 123.

    Then i went back to the IP address and...
  3. Antworten
    7
    Hits
    2.203

    UserName and Password Needed for webserver

    This used to work fine for seeing the P3 connected to a bridged router connected to the P3. But, now when I type in the IP address a GHL page comes up that asks for user name and password.

    What...
  4. Antworten
    26
    Hits
    6.122

    aaahhrrrgggg. The saga continues. Do I...

    aaahhrrrgggg.

    The saga continues.

    Do I have to change the wireless router to recieve incoming calls or the wireless bridge?
  5. Antworten
    26
    Hits
    6.122

    So, I am having another issue. I tried to connect...

    So, I am having another issue. I tried to connect to the P3 from my home computer and it will not connect. I also cannot view the P3 settings by punching the address into the IE broswer window.
    ...
  6. Antworten
    26
    Hits
    6.122

    Hi Matthias, tell me about it. I am :confused:...

    Hi Matthias, tell me about it. I am :confused: too. Here is the dilemma. da Artsy Cube is located at work. We have two routers, a direct LAN line router and a separate wireless router system. The...
  7. Antworten
    26
    Hits
    6.122

    Okay, I ran ipconfig on the office laptop...

    Okay, I ran ipconfig on the office laptop computer. I can actually connect this with a Wired LAN line and a wireless router. Both settings are below. I', goint to try to connect the P3 directly to...
  8. Antworten
    26
    Hits
    6.122

    When you say network. I thought you were refering...

    When you say network. I thought you were refering to the wireless router. It sounds like you are referring to the computer's IP address feature. I found it and I can disable it to program specific...
  9. Antworten
    26
    Hits
    6.122

    The wireless network is 192.168.2.1 and I have...

    The wireless network is 192.168.2.1 and I have the PC on "find IP address automatically"
    I am trying connect by hardwire, so I don;t understand the point of needing the network IP address.
  10. Antworten
    26
    Hits
    6.122

    I tried another LAN cable. Still no connection.

    I tried another LAN cable. Still no connection.
  11. Antworten
    26
    Hits
    6.122

    Matthias, thanks for getting involved this will...

    Matthias, thanks for getting involved this will be helpful.

    Okay, I tried connecting via wored LAN line and no connection. I did perform a reboot by disconnecting power cord for ten seconds. Is...
  12. Antworten
    26
    Hits
    6.122

    Thanks Matthias. That tip is helpful. I will try...

    Thanks Matthias. That tip is helpful. I will try that this morning and then move on to the bridge after that.

    I had a working bridge, but returned it to the store. What I mean by working bridge,...
  13. Antworten
    26
    Hits
    6.122

    Jason thanks for the help. I've been working on...

    Jason thanks for the help. I've been working on it, but still no success. I had trouble with the wireless router at the office trying to determine its IP address.

    That wireless router is up and...
  14. Antworten
    26
    Hits
    6.122

    Jason, I do not have the option to edit the...

    Jason, I do not have the option to edit the subnet mask or gateway addresses. Where are you entering this information?

    Also P3 ends in 111 but computer is 110. Is this correct?
    Cheers,
    Scott
  15. Antworten
    26
    Hits
    6.122

    Jason, I think that is what I did. But P3 still...

    Jason, I think that is what I did. But P3 still does not respond. Can you give more explicit detail to what you did in a format like I posted above?
    Cheers
  16. Antworten
    26
    Hits
    6.122

    Matthias, am I setting up the P3 correctly here?...

    Matthias, am I setting up the P3 correctly here?

    The bridge I am using is working. It has been tested on other devices, no problem. The issue I am having is with the P3 device configuration.
    ...
  17. Antworten
    26
    Hits
    6.122

    Need Help P3 to Internet via Wireless Bridge

    I have been having troubles connecting the P3 to a router.

    I purchased a Trendnet TEW-647GA. It is designed as a wireless bridge for games like the Xbox to connect to a router in another room....
  18. Wichtig: I too had some major problems here. I wanted to...

    I too had some major problems here. I wanted to give an update on the issues I encountered and what solved it.

    I used a Belkin F5U409-CU USB to Serial adapter. The software is not Windows 7...
  19. Antworten
    5
    Hits
    2.150

    Hmm, interesting. Thanks for the input. I am...

    Hmm, interesting. Thanks for the input. I am certainly glad that I got out of the Dell. Something wierd with those machines I tested.
    Cheers
  20. Antworten
    5
    Hits
    2.150

    Here is an update. I took the machine back to the...

    Here is an update. I took the machine back to the store and tested the program in four other Dell laptops. All machines produced the same result.

    Then, I ran the program in the same Windows Home...
  21. Antworten
    5
    Hits
    2.150

    So I spent some more time surfing the Vista...

    So I spent some more time surfing the Vista website.

    It does appear that many people have had issues running software developed for a 32bit environment on the new Vista 64-bit operating system. ...
  22. Antworten
    5
    Hits
    2.150

    Troubles with Profilux Control on Vista

    So I have tried numerous times to uninstall and reinstall the Profilux Control (many different versions too) and it will not run the program on a 64bit Vista system

    The error message reads:
    ...
  23. Thema: Wireless USB

    von cerreta
    Antworten
    3
    Hits
    1.865

    I tried it. No work. You have to use an adapter...

    I tried it. No work. You have to use an adapter to convert the printer USB port to a standard USB port. I then connected the USB WLAN device and it would not get any power.

    It could be the...
  24. Thema: Plm-usb

    von cerreta
    Antworten
    0
    Hits
    1.049

    Plm-usb

    Hi. Is this a 2.0 or 1.1 USB connection speed?
    Cheers
  25. Antworten
    2
    Hits
    1.436

    Wow. Those options make this controller better...

    Wow. Those options make this controller better than the new Tunze 7096 contoller. Thanks man. I'm buying one this weekend.
Zeige Ergebnis 1 bis 25 von 27
Seite 1 von 2 1 2