Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Antworten
    1
    Hits
    204

    Please open a support ticket for further...

    Please open a support ticket for further assistance with this.
  2. Thema: Tunze cables?

    von Vinny
    Antworten
    2
    Hits
    213

    The splitter is not necessary, but does have its...

    The splitter is not necessary, but does have its advantages because it lets you save a 1-10V port on your controller and lets you keep an open port if you end up needing to control another 1-10V...
  3. Antworten
    1
    Hits
    171

    Please open a support ticket if you haven't done...

    Please open a support ticket if you haven't done so already.
  4. Antworten
    4
    Hits
    426

    Hanna checkers are not a reliable cross reference...

    Hanna checkers are not a reliable cross reference due to the variables this instrument has compared to the KHD. If you want to verify KHD accuracy, it is best done with the 7.5 dkH Reference fluid.
    ...
  5. Antworten
    4
    Hits
    426

    A new probe should be purchased as leaving it...

    A new probe should be purchased as leaving it inside the KHD without using it is not the proper way to store it after that long.
  6. Antworten
    3
    Hits
    244

    Temporarily set the speed to (1), save and test....

    Temporarily set the speed to (1), save and test.

    Set the speed back to (0), save, recalibrate, save and test.
  7. Antworten
    3
    Hits
    244

    Hi Ronald, Can you please include a screenshot...

    Hi Ronald,

    Can you please include a screenshot of your dosing schedule settings?
  8. Thema: length

    von Vinny
    Antworten
    3
    Hits
    246

    Yes, 15 meters.

    Yes, 15 meters.
  9. Thema: length

    von Vinny
    Antworten
    3
    Hits
    246

    About 15m.

    About 15m.
  10. Antworten
    1
    Hits
    381

    That looks good to me. The measurement cell is...

    That looks good to me.

    The measurement cell is best placed in a by-pass anyway.
  11. Antworten
    4
    Hits
    518

    We have added a section to our STDL4-4 setup...

    We have added a section to our STDL4-4 setup article which covers this very topic:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-stdl4-4-powerbar-to-profilux/

    See Troubleshooting...
  12. Antworten
    4
    Hits
    363

    There were some units from a few years ago which...

    There were some units from a few years ago which were assembled with caps outside of their tolerances. If the original owner replaced the caps and can show the pumps running without any jamming or...
  13. Antworten
    4
    Hits
    363

    The sale date would be based on the date written...

    The sale date would be based on the date written on the sales receipt. For warranty purposes, if one is not available, then we would go by the build date of the device. It looks like this one was...
  14. The tank size per light is a very rough estimate...

    The tank size per light is a very rough estimate since every tank will hold different types of plants and coral, each having their own set of lighting preferences. If you would prefer to have more...
  15. Hello, Yes, you can run an AWC / ATO task...

    Hello,

    Yes, you can run an AWC / ATO task using 2 sensors. The upper sensor can be doubled-up as your ATO sensor too. More information on that can be found here:...
  16. Antworten
    1
    Hits
    185

    Any 1-10V compatible pump can be used alongside...

    Any 1-10V compatible pump can be used alongside the P4 controller. Take a look at the Tunze NanoStream 6040 pump which is controllable via the P4. You can use this an a GHL Tunze 1 cable to control...
  17. Antworten
    1
    Hits
    178

    Adding an O2 probe and expansion card will give...

    Adding an O2 probe and expansion card will give you more insight on how that parameter changes throughout the day. It would also be useful because the ProfiLux can notify you if the desired O2 level...
  18. Antworten
    4
    Hits
    254

    For pH control, you would only need the CO2 tank,...

    For pH control, you would only need the CO2 tank, solenoid (plugged into the powerbar), and pH probe.

    Within the ProfiLux you would set your desired pH value and hysteresis. Based on those...
  19. Antworten
    1
    Hits
    498

    Hola, Ese modelo de Jebao no es compatible con...

    Hola,

    Ese modelo de Jebao no es compatible con 1-10v.
  20. Hi there, If you're going to do mostly...

    Hi there,

    If you're going to do mostly high-light demanding plants, 4x 7006 fixtures would be ideal since it will put out that extra bit of light necessary for those plants. This option would also...
  21. Antworten
    1
    Hits
    188

    Due to safety concerns, Powerbars should never be...

    Due to safety concerns, Powerbars should never be serviced by the user. Open a support ticket for further assistance.
  22. Antworten
    3
    Hits
    491

    You're welcome! :)

    You're welcome! :)
  23. Antworten
    3
    Hits
    491

    Each head has a pair of clips that hold it onto...

    Each head has a pair of clips that hold it onto the body of the doser. Pinch these clips and pull away from the body. Take the new head and insert it onto the doser until you hear a "click" sound.
  24. Antworten
    1
    Hits
    691

    Please create a support ticket.

    Please create a support ticket.
  25. Antworten
    7
    Hits
    521

    Steps for creating a virtual probe can be found...

    Steps for creating a virtual probe can be found here:
    https://www.aquariumcomputer.com/knowledge-base/how-to-add-a-virtual-probe/
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4