Search:

So the pin 1(12v), Pin2(1-10v), 5(1-10v) are having the same max of 20mA per channel with common ground.

Am i right?

Hi Gunther,

Thanks for the reply.

Btw, do you happen to know the mA for the individual channel for the dimmer output (1-10) ?

Hi,

Anyone know the mA (current) of the 12v from the pin 1 of L1/L2 western socket from Pll light?

Need to know it urgently!

Please helps.

Hi Matthias,

Yes I do know that the 1-10V is below 30mA, but how about the +12V pin?

Do you mean that all 6 pins are having the same amp of below 30mA per pin output?

Thanks.

Hi Matthias,

Since Tunzer has brought out the current (Amp) of the 12v from the ProfiLux.

I think it's good to know what is the actual current(amp) provided, although many users know that It...

any link to refer?

Hi Matthias,

My PII light's version is 5.00p.

Btw, I've have difficulty in understand the operation instruction manual provided. Do you have any step by step setup instruction manual or help...

Hi all,

Just got my Profilux-ser cable and USB to Serial conventer so next step is to download the ProfiLuxControl, Version 5.0.0.12 from GHL website. Am i right?

Do you have the link for getting the cable and convertor from GHL?

btw, Is it normal for PII light's control panel Key button's light not fully brighten/lighted up?

I'm 1st time profiLux user...

Dear Matthias,

May I know whether normal off-the-shelf RS232 to USB cable can it be used to interface the PII light to notebook? or do I need specially buy from GHL?

I prefer to program all the...

12V of 800mA;)?

Hi Matthias,

Is pin 1, a constant output 12v supply or can be controlled?

Regards
James

What is pin 4 & 6 use for :rolleyes:?

Which pin should I connected to the dimmable driver's positive and negative dimmer line?

pin 2 & 3 or 5 & 3 or otherwise?

Hi Matthias

May I know what is the pins configuration for the 1-10v port for ProfiLux Light controller?

I need it to connect my dimmable LED driver correctly.

Please kindly advice.
...

Thanks Martin.

I'm clear now :p.

Hi Matthias,

If I make use of the ProfiLux's powerbar to cut off the main AC (110v) to the Meanwell power supply by setting timer. Since there is no ac 110v to the Meanwell power supply, no output...

It's ok for me if the meanwell output is not fully cut off when 10v drop 0 because by then, the timer will switch off the main meanwell power supply that I have connected from AC main.

Hi all,

I have 4 meanwell dimmable power supplies and would like to make use of the ProfiLux's 1-10V port for my diy LED lighting.

Can I connect the ProfiLux II light's 1-10V port directly to...