Suchen:

Art: Beiträge; Benutzer: AndreO

Seite 1 von 7 1 2 3 4

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Thema: skimmer control

    von AndreO
    Antworten
    4
    Hits
    507

    Thank you all I have it working ( i think) I went...

    Thank you all I have it working ( i think) I went to pro logic and tried several times. Then read some more and found that in the pull down list filter means feed pause. and G1 is pro-logic 1 etc...
  2. Thema: skimmer control

    von AndreO
    Antworten
    4
    Hits
    507

    skimmer control

    I have skimmer on switch 5 as a filter but I have to choose 1 to 4 Then in feed pause I checked all four boxes but it only turns off when I use feed pause 4 .After testing a found that if I change...
  3. Antworten
    0
    Hits
    468

    optical level sensor dry

    I thought that there is a way to use the optical sensor on the outside of tank yes or no . If so how do you set it up Thanks AndreO
  4. Antworten
    1
    Hits
    429

    Vortech controller. How many pumps

    I have tried over the years to assign 5 mp10 pumps. I can get 4 recognized but the next pump doesn’t show up on the pump list but does respond as if it is a number one pump. So any time the number...
  5. Antworten
    1
    Hits
    1.698

    update to above the over view still says error 3...

    update to above the over view still says error 3 but the pump is working as it should seems that when it was to go into its next time change ( lagoon calm mode it did and the led is back to purple)
  6. Antworten
    1
    Hits
    1.698

    vortech controller error 3

    The time changed this weekend and one of my 5 pumps now show error 3. so I reset them all numerous times but that pump still has error 3 and the center LED is green all the others are still running...
  7. Thema: new od pumps

    von AndreO
    Antworten
    11
    Hits
    4.526

    where do i find these updated firmware...

    where do i find these updated firmware files..AndreO
  8. Thema: new od pumps

    von AndreO
    Antworten
    11
    Hits
    4.526

    you can not see me but I am doing the Happy dance

    you can not see me but I am doing the Happy dance
  9. Antworten
    1
    Hits
    1.534

    can i add a doser 2

    I have a doser 1 ( blue original) set up in my system as sockets 1-4 can I then add a dosser 2 to the PAB line and will they both show up in doser overview so they can be set up.
  10. Antworten
    3
    Hits
    1.833

    when in doubt read the manual there is lots of...

    when in doubt read the manual there is lots of info in the ecotech pump manual. But there is not a QD manual and the pump did not come with one ( only has quick start guide)
  11. Antworten
    40
    Hits
    14.582

    I have since up dated the controller and now it...

    I have since up dated the controller and now it tells me that I have unknown pumps but it did see the one older ecotech pump. I also tried to get firmware info from Ecotech but what they want is one...
  12. Thema: new od pumps

    von AndreO
    Antworten
    11
    Hits
    4.526

    I have sent all the info as requested I as i...

    I have sent all the info as requested I as i said in other post this is only since adding the QD drivers....AndreO
  13. Thema: lost pumps

    von AndreO
    Antworten
    5
    Hits
    7.841

    I think that once the vortech controller is...

    I think that once the vortech controller is fixed then the profilux will see the pumps and they will show on the Touch
  14. Thema: return pump

    von AndreO
    Antworten
    3
    Hits
    2.492

    return pump

    Ecotech has a new line of return pumps that are controlled using a QD controller. do you know if they are compatible with your controller
  15. Antworten
    10
    Hits
    4.207

    I use the second port for my touch display...

    I use the second port for my touch display screen. Every pab device has two ports so that you can keep adding devises such as another pab power bar as these are daisy chained but can never be...
  16. Antworten
    2
    Hits
    2.608

    I have it working now this is how to configure...

    I have it working now this is how to configure it..... have controller set you first pump to master and all others set according how you have them positioned around the tank and assign the using the...
  17. Antworten
    10
    Hits
    4.207

    I have read you posts again and is it your pump...

    I have read you posts again and is it your pump that is not wireless. In order for the controller to work with the pumps they have to be wireless enabled. This means when they power up the W in the...
  18. Antworten
    10
    Hits
    4.207

    that is so you add more Pab devises. I have 5...

    that is so you add more Pab devises. I have 5 vortech pumps running on my controller just follow the instructions to the T. Think off it that the controller tells the pumps what to do. But I...
  19. Thema: new od pumps

    von AndreO
    Antworten
    11
    Hits
    4.526

    done some testing

    I have done some testing so I hope this helps . it is only the pumps thst have the new QD driver that have the problem. when I install the old driver back to the pump the controller sees the pump...
  20. Thema: lost pumps

    von AndreO
    Antworten
    5
    Hits
    7.841

    I have now updated the touch and still only shows...

    I have now updated the touch and still only shows pump 1 at 80 and pump3 at 40 and I added one more pump to tank so now have 5 running and they are doing the Tidall swell mode as per ecotech and are...
  21. Antworten
    2
    Hits
    1.552

    thank you

    thank you it is done
  22. Thema: new od pumps

    von AndreO
    Antworten
    11
    Hits
    4.526

    Well I have now updated the controller and the...

    Well I have now updated the controller and the touch. The touch no difference still only shows pumps 1 and 3 plus the info for them is wrong it is still stuck at 40 and 80. The vortech controller...
  23. Thema: new od pumps

    von AndreO
    Antworten
    11
    Hits
    4.526

    new od pumps

    well I got out my back up mp 10 and connected it to vortec controller and it sees it as an MP10 eco w and displays firmware. but my new mp10 qds (4 of them still show up as mp 40 www.and nothing else...
  24. Thema: lost pumps

    von AndreO
    Antworten
    5
    Hits
    7.841

    Firmware 1.05 all 4 of my pumps are programmed...

    Firmware 1.05 all 4 of my pumps are programmed the same way they are set up to do tidal swell mode and that is what they are doing but the touch says 1 is 80% and 3 is 40% all day long the other...
  25. Thema: lost pumps

    von AndreO
    Antworten
    5
    Hits
    7.841

    any one some help please

    any one some help please
Zeige Ergebnis 1 bis 25 von 164
Seite 1 von 7 1 2 3 4