Suchen:

Art: Beiträge; Benutzer: Karytse

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Thema: Khd

    von Karytse
    Antworten
    2
    Hits
    1.348

    Yes, if you have a Standalone Doser 2.1.

    Yes, if you have a Standalone Doser 2.1.
  2. Can i go from GCC 1.1.2.4 directly to GCC 1.1.2.6

    I am using GCC 1.1.2.4 with P4 firmware 7.19. Can I upgrade to GCC 1.1.2.6 with P4 firmware 7.21 without installing GCC 1.1.2.5 (with P4 firmware 7.20)? Thanks.
  3. Antworten
    4
    Hits
    556

    Yeap, just once a week. It is the problem of my...

    Yeap, just once a week. It is the problem of my skimmer pump, it have some difficulties start up after switching it on and off, that's why i want to try it on 1-10V. Time for a new pump maybe :(...
  4. Antworten
    4
    Hits
    556

    Thanks Vinny. I used this kind of PL before, but...

    Thanks Vinny.
    I used this kind of PL before, but i don't want to switch on and off the pump that often, I am actually trying to see if the 1-10V interface have similar "delay on" after maintenance...
  5. Antworten
    4
    Hits
    556

    1-10V controlled skimmer pump

    My skimmer pump is controlled by the 1-10V interface, which I configured it to operate at Minimum during maintenance mode. This maintenance mode is for manual water change, which turn off the return...
  6. Antworten
    24
    Hits
    7.789

    Thanks Gael and Pit. Will try yo find a proper...

    Thanks Gael and Pit. Will try yo find a proper connector for this. Just to make sure I am correct on the pin assignment, on this picture 10870, is the left most pin the Pin 1?
  7. Antworten
    24
    Hits
    7.789

    Thanks. I made one using a RJ11 connector, but...

    Thanks.
    I made one using a RJ11 connector, but doesn't seems to working. Just wanted to be sure about the pin assignment, is this how it should be connected? The black cable goes to the "Positive...
  8. Antworten
    24
    Hits
    7.789

    I am a mechanical guy and really not good at...

    I am a mechanical guy and really not good at electrical stuff. I have a RD5 controller, from the manual it said it can do 0-10V adjustment, using a earphone plug with the attached connection 10855...
  9. Antworten
    0
    Hits
    389

    Mitras Mounting

    I am considering getting the LX6300 for my tank, but have a problem on the mounting. The space between the back of the tank to the wall is just about 1 inch, so the Mitras Flex Mount System is not...
  10. Antworten
    12
    Hits
    1.866

    Matthias, this is the location of the probes. ...

    Matthias, this is the location of the probes.
    9990
  11. Antworten
    12
    Hits
    1.866

    I also have P4, with 7.08 firmware and 6512 Wifi...

    I also have P4, with 7.08 firmware and 6512 Wifi Module. The probes are all new, and without any extension.

    This is what i received when this problem happened:
    -----------
    Temperature 1 : ...
  12. Antworten
    12
    Hits
    1.866

    I have similar issue problem too. Whether i got...

    I have similar issue problem too. Whether i got this false alarm, the temperature shown is always 40C.
  13. Antworten
    8
    Hits
    1.006

    Vinny, I tried re-assign the device but still...

    Vinny, I tried re-assign the device but still didn't work. But after re-starting my router and moderm for a couple of times, myGHL suddenly back online. Really don't understand why this happened,...
  14. Antworten
    8
    Hits
    1.006

    Wifi Module firmware is 6512 P4 firmware 7.08

    Wifi Module firmware is 6512
    P4 firmware 7.08
  15. Antworten
    8
    Hits
    1.006

    I disabled the blinking, I just switched it on...

    I disabled the blinking, I just switched it on and it's blinking white.
  16. Antworten
    8
    Hits
    1.006

    Not the GHL logo on the top of the P4, but the...

    Not the GHL logo on the top of the P4, but the myGHL logo on the screen.
    Can connect via GCC (Wi-Fi) and the app within the home network.
  17. Antworten
    8
    Hits
    1.006

    myGHL not working?

    I suddenly cannot connect to the myGHL, it worked fine for the last 2 months, it just suddenly didn't work. I have restarted the P4, but still nothing. The myGHL logo is flashing on the screen. ...
  18. Antworten
    4
    Hits
    2.209

    The chiller is connected to Powerbar, and...

    The chiller is connected to Powerbar, and "Function" is set to be Temperature 1 (the temperature probe) and "Sub function" set to Cooler.
    The chiller is turned on (by the P4) at 26.4C (25C + 5/6*1...
  19. Antworten
    4
    Hits
    2.209

    Thanks Pit. As i am not using the Nightly...

    Thanks Pit.

    As i am not using the Nightly change and also haven't set any alarm yet, so i think the equations should reduce to this:
    Lower limit: Nominal -0.5*Hysteresis
    Upper limit: Nominal...
  20. Antworten
    4
    Hits
    2.209

    Setting for TK1000

    Hello, i just got my P4 last week, just stared doing the setup
    I am using TECO TK1000, the current setting is Nominal Temp : 25C, Hysteresis: 1C on the TECO. I should put these values into P4,...
Zeige Ergebnis 1 bis 20 von 21