Suchen:

Art: Beiträge; Benutzer: mlandscape

Seite 1 von 5 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden.

  1. OK Thilo and thanks for update

    OK Thilo and thanks for update
  2. I don't whether this problem was supposed to have...

    I don't whether this problem was supposed to have been resolved in the latest update but if it was it didn't work. Very frustrating having to keep turning the phone backwards and forwards to gain...
  3. Antworten
    2
    Hits
    442

    This is something that I have enquired about...

    This is something that I have enquired about before as well - could do with it bringing up the list of things to do. Please !!!
  4. Checked Connect APP and My GHL the section is...

    Checked Connect APP and My GHL the section is definitely missing.

    12756


    I would be surprised if it is anything to do with the chip because apart from this problem it is all working OK.
    ...
  5. I have set both pumps to OFF and saved but when I...

    I have set both pumps to OFF and saved but when I scroll down the Vortech Page there is nothing where I can specify which feed to react to. I also resaved the assignments

    12754

    12755

    Can...
  6. Hello Vinny and thanks for the reply. I am...

    Hello Vinny and thanks for the reply.
    I am afraid I still don't get this
    Firstly I assume that whatever you are saying should be applied to both pumps even though Master and slave?
    When I go into...
  7. How to set up Feed Pause with Vortech Controller

    I looking to set up a feed pause that will stop my Ecotech MP10's which are already connected to the Vortech Controller as Master and Slave
    I can see there is a Feed Pause setting in the Vortech...
  8. Not a problem always glad to help.

    Not a problem always glad to help.
  9. Connect App now not fitting on iPhone screen

    I am not sure whether it was when Apple released IOS 14 or the latest Connect App update but now the App is overlapping the screen at the top and affecting the ability to use the menu button. If I...
  10. Antworten
    6
    Hits
    1.165

    Ok thanks Thilo

    Ok thanks Thilo
  11. Antworten
    6
    Hits
    1.165

    Firstly there was no alarm message on the display...

    Firstly there was no alarm message on the display or an Alarm email when the Profilux started flashing Red/Blue.

    There was one this morning which like I said appeared overnight and related to the...
  12. Antworten
    6
    Hits
    1.165

    I don’t believe it is PAB issue because...

    I don’t believe it is PAB issue because everything working OK.
    Overnight the Profilux as started to show an alarm and now both the Profilux and the slave Doser are flashing alternate red/blue. The...
  13. Antworten
    6
    Hits
    1.165

    GHL Logo Warnings

    On my P4 I have an alternate Blue/Red logo warning and on a slave doser, I have alternate Yellow/Blue warning.

    In myGHL I have only received one Yellow notification which is for a fill level on my...
  14. Antworten
    24
    Hits
    2.979

    Right OK thanks

    Right OK thanks
  15. Antworten
    24
    Hits
    2.979

    Now I am back in front of the tank the set up...

    Now I am back in front of the tank the set up with the two sensors is just not working even having raised the time to 45 minutes it was still alarming out. As you have suggested I will be raising a...
  16. Antworten
    24
    Hits
    2.979

    Thanks for clarifying all that. I would suggest...

    Thanks for clarifying all that. I would suggest that if there are such limits etc on running 2.1 Doser heads then that should have been made clear in the video and in the appropriate literature etc...
  17. Antworten
    24
    Hits
    2.979

    It certainly adding far more than normal and in...

    It certainly adding far more than normal and in larger quantities which I am not comfortable with and I am concerned that it is possibly affecting parameters.
    You know the ATO mode is with two...
  18. Antworten
    24
    Hits
    2.979

    I can’t sit in front of the device when I am...

    I can’t sit in front of the device when I am not there. I have tried 5, 15, 20 and lastly 25 mins and on each occasion it alarms out. You can’t be saying that I need to run the doser over 25 mins...
  19. Antworten
    24
    Hits
    2.979

    I am afraid that the use of this ATO control is...

    I am afraid that the use of this ATO control is proving to be a disaster. There is no point me raising a ticket as the main GHL site is saying that tickets will be dealt with on their return from...
  20. Antworten
    24
    Hits
    2.979

    OK, thanks - no refugium so not as much of a...

    OK, thanks - no refugium so not as much of a problem but realise need to keep clean.
  21. Antworten
    24
    Hits
    2.979

    OK Thanks hopefully it will be OK. Presumably,...

    OK Thanks hopefully it will be OK.

    Presumably, if I want to get more frequent smaller doses in less time then I should go to the ATO with one sensor? Wish I had known that would have saved me the...
  22. Antworten
    24
    Hits
    2.979

    Sensor 4 is the optical Sensor and that did react...

    Sensor 4 is the optical Sensor and that did react from X to -
  23. Antworten
    24
    Hits
    2.979

    Yes Sensor 3 State Direct and State Delayed...

    Yes Sensor 3 State Direct and State Delayed changed from - to x and the alarm disappeared

    Sensor 4 stayed with just X on both
  24. Antworten
    24
    Hits
    2.979

    Sorry might being a bit slow here but I can't...

    Sorry might being a bit slow here but I can't find anything that will toggle.

    Here's another screenshot I have it set to Sensor 3 and 4 using a splitter cable. I assume Sensor 2 is the Leak...
  25. Antworten
    24
    Hits
    2.979

    I have looked at that I can't get anything to...

    I have looked at that I can't get anything to toggle except the invert switch which is not relevant. Which am I supposed to be toggling?

    This is a screenshot of what it is showing the myGHL cloud...
Zeige Ergebnis 1 bis 25 von 119
Seite 1 von 5 1 2 3 4