Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden.

  1. One may wish to have two separate controller...

    One may wish to have two separate controller systems within the same network instead of running everything on 1 controller. Each controller will have its own IP address and device address so that it...
  2. Antworten
    2
    Hits
    166

    Hi Enea, You can do this using the MAINTENANCE...

    Hi Enea,

    You can do this using the MAINTENANCE mode settings.

    The info below assumes you already have your ATO function setup.

    CONNECT ATO HEATER AND ATO CIRCULATION PUMP
    1. Connect the...
  3. Multiple P4 controllers can be added to the...

    Multiple P4 controllers can be added to the network. That is what it means.

    P4 also has 32 logic gates.
  4. It is already on the USA store page:...

    It is already on the USA store page:
    https://www.aquariumcomputer.com/usa/product/kh-director-reagent-set/

    Since this is a new item, USA will be receiving these in a few weeks.
  5. Antworten
    5
    Hits
    1.783

    Gen 1 dosers do not have the hardware capability...

    Gen 1 dosers do not have the hardware capability to support this feature.
  6. Device being used? Standalone 2.1 w/ 3 pump ...

    Device being used?
    Standalone 2.1 w/ 3 pump

    Firmware version of device?
    1.28

    Version of GHL Control Center being used?
    1.1.1.3

    Are you trying to connect using AUTO IP or STATIC IP?
  7. Antworten
    3
    Hits
    223

    KH Director is not going to be listed there...

    KH Director is not going to be listed there because it is a PAB-device.

    Assign the KHD to your P4. This is the same process as when you added your 1st PB5.1.
    We have a video here, if you need it:...
  8. Antworten
    10
    Hits
    359

    No worries.

    No worries.
  9. Antworten
    10
    Hits
    359

    You asked how to connect and setup the non-PAB...

    You asked how to connect and setup the non-PAB powerbar. I provided those steps.

    Presumably your PAB powerbar and dosing pump was already connected and configured. That's why no mention is made of...
  10. Hi, You would need the following: KH...

    Hi,

    You would need the following:

    KH Director
    Doser 2.1 Slave
    PAB-cable


    The KHD and D2.1 slave can be purchased together as a set. In addition to this, you will need an additional...
  11. Antworten
    5
    Hits
    226

    That's great! Thank you for sharing your steps!

    That's great!

    Thank you for sharing your steps!
  12. Okay. To better assist, we need a lot more...

    Okay.

    To better assist, we need a lot more information.

    Device being used?
    Firmware version of device?
    If connecting to ProfiLux 4 or Mitras LX7, what is the firmware version of the WiFi...
  13. Antworten
    5
    Hits
    226

    Check the WiFi module firmware on your LX7. We...

    Check the WiFi module firmware on your LX7. We are currently on 6619.
  14. What exactly are you trying to do? You...

    What exactly are you trying to do?

    You mention trying to login, but GCC requires no login.
  15. Antworten
    10
    Hits
    359

    As mentioned earlier, these two powerbars use...

    As mentioned earlier, these two powerbars use different communication cables therefore they use different ports on the Profilux.

    No changes need to be made to anything else. Just follow the steps...
  16. Antworten
    5
    Hits
    226

    Are you using the app when you are within your...

    Are you using the app when you are within your network range?
  17. Antworten
    10
    Hits
    359

    Hi there, This 6D powerbar does not actually...

    Hi there,

    This 6D powerbar does not actually daisy chain to the 6D-PAB as they each use different communication cables.

    Your 6D-non PAB would have to be connected to the S1-S4 outlet on the...
  18. Antworten
    3
    Hits
    207

    Okay so what are the firmware versions currently...

    Okay so what are the firmware versions currently running on the device?
  19. P4 compatible MLB-splitter is still on our...

    P4 compatible MLB-splitter is still on our release list and will be available momentarily.
  20. Antworten
    3
    Hits
    207

    Make sure you are running the most recent...

    Make sure you are running the most recent firmware for both the P4 itself and the Wifi module.
  21. Antworten
    1
    Hits
    287

    Hello Felipe, Any of our ProfiLux 4 sets would...

    Hello Felipe,

    Any of our ProfiLux 4 sets would be suitable for your aquarium. You can choose from either the Mega set or Ultimate Set.

    Mega set includes: P4 controller, probes (temp, pH, redox,...
  22. Antworten
    3
    Hits
    334

    Let's start with the basics... What product...

    Let's start with the basics...


    What product are you trying to connect to? Doser 2.1, ProfiLux, etc...


    What is the firmware version of your device?
  23. From our manual: ProfiLux 4 allows you to ...

    From our manual:
    ProfiLux 4 allows you to connect Flow sensors to our controller. These can be connected to the permanently installed level inputs 1 or 2 and to ProfiLux ...
  24. Antworten
    8
    Hits
    501

    All 16 are refilled?

    All 16 are refilled?
  25. Antworten
    3
    Hits
    293

    Uninstall GHL Control as that app is now...

    Uninstall GHL Control as that app is now obsolete.

    As mentioned above, yes, it's possible if you are comfortable with port forwarding.
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4