I have checked the connect more than ounce and the probe is new with my profilux. Never showed reasonable value. Neverless will check conn. and cable one more time after post. What to do then?:o
Type: Posts; User: Brandon
I have checked the connect more than ounce and the probe is new with my profilux. Never showed reasonable value. Neverless will check conn. and cable one more time after post. What to do then?:o
I placed the probe back in water and after a while the ph reading drops to about 3.0+/- everytime I ahve calibrated it.???
I have calibrated my ph probe several times now and are having problems with the value jumping all over the place. When i calibrate the probe it doesn't say there is a problem with the calibration,...
Can I upgrade firmware straight to most recent or do you have to go one update at a time:cool:
Thank you for a reply. It popped up just now. S you are saying that the version of firmware is the problen with the temp deviation setting
so muck for support
The fan turns on when the tank warms up but the deviation option on the temp screen is still greyed out. Also I was wondering if there is anyway to turn on the fan manualy and very output voltage...
Have even tried turning on the manuel override. the plug powers up and the power supply for the breeze lights up but does not turn on and does not change anything in the temp setting menu like...
I have even checked the breeze controler to verify the jumper are on pins 1&2. I just don't know what I am missing after double and triple checking
I just checked the l port settings. set to tempatrure1 controler and double checked the connection cable. check that the breeze power supply is plugged into the chiller plug on digital power bar and...
When i go to the temp screen i see the 1-10v deviation setting but it is not activated or is in the background.:confused:
When I go int the 1-10v interface menu the fist option only has the sensors controls (e.g. tempature1,ph1,redox1) it does not say chiller or heater and the second option only has controller output...
I am trying to hook up my breeze controller, but having a bit of trouble on the software side of it. I'm not quite sure how the port knows to take it's q from the cooling channel when the only...