Suchen:

Art: Beiträge; Benutzer: swezoo

Seite 1 von 2 1 2

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Thema: Graphics

    von swezoo
    Antworten
    11
    Hits
    1.729

    Yes. Running 6.43 on Profilux and 1.0 on KHD.

    Yes. Running 6.43 on Profilux and 1.0 on KHD.
  2. Thema: Graphics

    von swezoo
    Antworten
    11
    Hits
    1.729

    Hi, The KHD is not listed under Measurement...

    Hi,
    The KHD is not listed under Measurement data. If I open the view of KHD I can see a disabled checkbox for "record measurement values".
  3. Thema: Graphics

    von swezoo
    Antworten
    11
    Hits
    1.729

    Hi, I noticed an update (1.1.2.5) where you now...

    Hi,
    I noticed an update (1.1.2.5) where you now store measurement data to GHL Connect. I can see all my values exept Kh (I can see the label for Kh, but no data is stored). Is something wrong with...
  4. Thema: Graphics

    von swezoo
    Antworten
    11
    Hits
    1.729

    Hi Any update regarding graph for khd with...

    Hi

    Any update regarding graph for khd with Profilux 3.1?
  5. Thema: P4 Alarming

    von swezoo
    Antworten
    5
    Hits
    414

    Another suggestion... You don't have any power...

    Another suggestion... You don't have any power cables running too close to the probe cable that you think can interfear? Thinking it should be somthing that swiches on and off in this case, since you...
  6. Thema: P4 Alarming

    von swezoo
    Antworten
    5
    Hits
    414

    You don't have the probe too close to the heater?

    You don't have the probe too close to the heater?
  7. Antworten
    5
    Hits
    625

    The calendar feature don't seems to work (or not...

    The calendar feature don't seems to work (or not as well). As soon as I add new entries it does delete the old ones. It dont seems to save if I use the copy function. Is the plan that this will...
  8. Thema: Graphics

    von swezoo
    Antworten
    11
    Hits
    1.729

    Hi, Where do i find the charts in myGHL? Or is...

    Hi,
    Where do i find the charts in myGHL? Or is it not available for P3.1 yet?
    If the answer is no, can I find it anywhere else for KHD? I cannot find it on the local webserver either.
  9. Thema: Kessil A360

    von swezoo
    Antworten
    29
    Hits
    18.646

    I think the first two are + and the second two...

    I think the first two are + and the second two are -. I think you need to connect them in correct order since it's DC curret. I'm not sure about this, but the description above is how I solved it.
    ...
  10. Hi guys, Any new information where you are in...

    Hi guys,
    Any new information where you are in shipment of the preorders?
  11. Antworten
    1
    Hits
    1.127

    I guess the tax is an issue. In US there is no...

    I guess the tax is an issue. In US there is no sales tax on internet orders. In EU it is about 20% tax depending on country. I think it is 19% in Germany.
  12. Antworten
    2
    Hits
    812

    Update on Vortech Controller (request)

    Hi guys,
    I would greatly appreciate if your could put som hours in a new version of your Vortech Controller. It's really a headache when you need to assign new pumps or change a pump. It would be...
  13. Thema: Kessil A360

    von swezoo
    Antworten
    29
    Hits
    18.646

    When you have cut of the connectors you will have...

    When you have cut of the connectors you will have 4 wires. 2 from the white and 2 from the red RCA connector. Figure out witch one is running from the tip of the 3.5mm plug and connect it to pin 1 in...
  14. Thema: Kessil A360

    von swezoo
    Antworten
    29
    Hits
    18.646

    Yes, you need one LBF-AP and also one stereo 3.5...

    Yes, you need one LBF-AP and also one stereo 3.5 plug. I used this one (http://www.clasohlson.com/uk/Exibel-RCA-Audio-Cable/Pr327701000), but I'm sure you can find similar in a lot of different...
  15. Thema: Kessil A360

    von swezoo
    Antworten
    29
    Hits
    18.646

    Yes, you can control the Kessil via the Profilux...

    Yes, you can control the Kessil via the Profilux computer. I'm using two light channels for this. One for intensity and one for color. This solution work great for me with full control of the light....
  16. I had the same problem with my expansion box 1. I...

    I had the same problem with my expansion box 1. I noticed the ADC-values was changed in expansion box (which caused the problem). As soon as I changed them to the same values as in the Profilux...
  17. Worked like a charm! Thanks!

    Worked like a charm! Thanks!
  18. Thank you for quick reply! Is there any way to...

    Thank you for quick reply!
    Is there any way to move the data/set points from illumination 1 to say 10, from 2 to 11 etc? Or do I need to retype all set points (for the LED lights connected to the...
  19. Yes, I know it has to be set to slave to work...

    Yes, I know it has to be set to slave to work (and it does). But I'll try to clarify my question. :-)
    In the left side menu in GCC you have illumination 1-32. The PLM-PWC card transmit the settings...
  20. Change illumination run transmission via PLM-PWC

    Hi
    I just got my PLM-PWC module. By default does the PLM-PWC card transmit illumination run 1-9 (correct?)
    Is it possible to change this to say 11-19 instead (since I have other led light...
  21. Thema: Kessil A360

    von swezoo
    Antworten
    29
    Hits
    18.646

    Thanks Michael! I ordered one from my store and...

    Thanks Michael!
    I ordered one from my store and will try it out as soon as I get it. I also found some information that might be useful for someone in the future. Keep in mind that I have not tried...
  22. Thema: Kessil A360

    von swezoo
    Antworten
    29
    Hits
    18.646

    Try another bump :-) How did you get it to work?...

    Try another bump :-)
    How did you get it to work?
    Do anyone know if GHL planning to provide an easier connection solution for the Kessil (a cable like APEX do for Kessil or GHL do for Tunze)? Feels...
  23. I'm using Windows 10.

    I'm using Windows 10.
  24. I used USB. But during my third try I did not...

    I used USB. But during my third try I did not received any error message any more. Maybe something on my end since I'm using a Mac with Paralells and Windows installation.
  25. Antworten
    4
    Hits
    3.600

    I think you will be able to use the Ice Cap Gyre...

    I think you will be able to use the Ice Cap Gyre Controller with Profilux. It has not arrived on the European market yet. But CoralVue claim it will work with any aquarium computer with a 0-10V...
Zeige Ergebnis 1 bis 25 von 33
Seite 1 von 2 1 2