Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Hello Dung, There are many variables which...

    Hello Dung,

    There are many variables which will affect the visual clarity of the water, light configuration only plays a minor role in this case.
    Increasing the white spectrum may help.
  2. Antworten
    1
    Hits
    106

    You can get rid of the Illumination tile shown on...

    You can get rid of the Illumination tile shown on the GHL Connect dashboard by pressing the brush icon to enter edit mode. Press the red trash icon to remove, press the check mark to save.

    If you...
  3. Antworten
    4
    Hits
    140

    Hi, Glad to hear you sorted it out. :) As...

    Hi,

    Glad to hear you sorted it out. :)

    As long as you were able to see the Vortech controller during the PAB-device assignment step, the device will be added and displayed on the system...
  4. Hi, Yes, this is possible when you use the...

    Hi,

    Yes, this is possible when you use the Individually option.
    That allows you to specify the exact times to dose.

    If you're dosing supplements like Calcium or Alkalinity, dosing at night is...
  5. Thema: Measuring cell

    von Vinny
    Antworten
    5
    Hits
    151

    Flushing the cell with a 50/50 mix of water and...

    Flushing the cell with a 50/50 mix of water and vinegar will be okay.
    Just make sure to drain and flush the cell several times afterward so it is fully cleared of vinegar mix.
  6. Antworten
    4
    Hits
    187

    If the doser was not set to default settings, it...

    If the doser was not set to default settings, it will still try to connect to the original wifi network which is no longer present.
    In this case, you will need to connect over USB to set the device...
  7. Antworten
    5
    Hits
    651

    1. Go to pH probe settings, set desired pH level...

    1. Go to pH probe settings, set desired pH level
    2. Go to switch channels page, select socket where solenoid is connected, set function to pH decrease
    3. Save settings
  8. Thema: Kalkw + ph

    von Vinny
    Antworten
    1
    Hits
    274

    Looks good to me!

    Looks good to me!
  9. Antworten
    1
    Hits
    136

    Hi, The ProfiLux or Standalone doser does not...

    Hi,

    The ProfiLux or Standalone doser does not behave in this manner.

    You can either specify days of the week to dose or select the dosing interval.
  10. Thema: Doser 2.1 SA

    von Vinny
    Antworten
    2
    Hits
    125

    To add to what was said... The SA dosers can be...

    To add to what was said...
    The SA dosers can be switched over to SLAVE mode.
    To this you would have to connect to the SA doser's hotspot, then select Slave mode, and press save. The device will now...
  11. Antworten
    1
    Hits
    139

    For calcium reactor purposes, the native pH probe...

    For calcium reactor purposes, the native pH probe is best.
  12. Antworten
    4
    Hits
    216

    A tolerance of +/- 0.5ml is acceptable. ...

    A tolerance of +/- 0.5ml is acceptable.

    Perhaps the parts (head, tubing, rollers) are due for replacement due to age. That will certainly cause accuracy issues if the parts are worn down.
  13. Thema: Khd ph probe

    von Vinny
    Antworten
    4
    Hits
    268

    1. Empty KHD measurement cell 2. Place water...

    1. Empty KHD measurement cell
    2. Place water sample tube inside 7.5 reference bottle
    3. Flush measurement cell
    4. Run a KH test
  14. Antworten
    2
    Hits
    454

    As long as the pumps are reacting to the set...

    As long as the pumps are reacting to the set controls, nothing else needs to be done.
    QD pumps will be shown with a FW version of 0 and type as unknown, but will still function properly.

    This...
  15. Antworten
    3
    Hits
    230

    Hello, Please open a support ticket for...

    Hello,

    Please open a support ticket for further assistance.
    https://www.aquariumcomputer.com/support/tickets-enquiries/
  16. Antworten
    4
    Hits
    216

    What is the firmware version of both 2.0 dosers?

    What is the firmware version of both 2.0 dosers?
  17. Thema: Khd ph probe

    von Vinny
    Antworten
    4
    Hits
    268

    Hi, The pH probe used in the KHD is not a...

    Hi,

    The pH probe used in the KHD is not a standard probe.
    It is a modified one used strictly for KH measurement purposes. Being that it is also calibrated with lower pH levels, it will also be...
  18. Antworten
    3
    Hits
    195

    John, The digital temp probe should also...

    John,

    The digital temp probe should also register a lower reading when placed in the ice water.
    Is the probe stuck on 82° F?

    Follow these steps to see if the temperature value of this probe...
  19. Antworten
    4
    Hits
    306

    @Tksamac If you have not yet received a reply to...

    @Tksamac
    If you have not yet received a reply to your ticket, please post a reminder.
    A notification will be sent to the assigned support member.
  20. Thema: logbook Mg

    von Vinny
    Antworten
    2
    Hits
    453

    Hi Derek, Delete that existing category and...

    Hi Derek,

    Delete that existing category and create a new one with no decimal places.
  21. Please open a support ticket for further...

    Please open a support ticket for further assistance.
  22. Antworten
    1
    Hits
    373

    Hi, No new information has been released. ...

    Hi,

    No new information has been released.

    The most current info can be found on our product page:
    https://www.aquariumcomputer.com/products/ghl-cooling-technology/profilux-temperature-control2/
  23. Antworten
    2
    Hits
    162

    Take a look at the ION Director. ;)

    Take a look at the ION Director. ;)
  24. Thema: All in one unit

    von Vinny
    Antworten
    2
    Hits
    234

    Hello Dale, Thank you for your interest in our...

    Hello Dale,

    Thank you for your interest in our company and products.

    An "all-in-one" would not be so feasible because it would very likely fall outside of many user's budgets. The combination...
  25. Thema: LX 7204 and 7206

    von Vinny
    Antworten
    2
    Hits
    202

    Yes, you can do this when the PLM-PWC expansion...

    Yes, you can do this when the PLM-PWC expansion card is installed on the P4.
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4